For iPhone 6 LCD screen replacement touch digitizer LCD panel assembly White

Explanation:
Product name: Replaceable LCD screen for iPhone 6(white)

• 1. Compatibility: For iPhone 6 (no "Home" button), this screen replacement is only for iPhone 6 4.7 inches. Not applicable to other models.
• 2. The purpose is to replace the touch digitizer assembly of a defective LCD display. For example, screen operations are not responding properly, display problems, pixel distortion, LCD cracks, color problems, and old LCDs.
• 3. Each item is inspected and in good condition before shipment.
• 4. Make your device look easier to recover than ever.

Note before installation:
1. Tip 1: test before installation

• Do not remove any protective film or label during the test. Be aware of static electricity.
• Before making any repairs, be sure to use an ESD (electrostatic discharge) strap. This prevents static electricity from damaging the electronic components inside the phone.
• Always wear Eye protection and be careful not to cut your fingers with glass fragments.

2. Tip 2: Simulation test

• Replacement screen products are very fragile. We recommend that you test before installation. Please simulate the test, which means that in addition to the phone, (the motherboard + LCD or monitor) connect the audio cable and replace it with a new one, the test is complete. If the test is OK, install it. If it cannot be displayed, please contact us as soon as possible. Please do not force it to be installed on the phone. Once the screen is installed, we will not be responsible.

3. Tip 3: No double cables

• Make sure that the LCD cable is not too heavy. Bending more than 90 degrees can cause a black screen.

4. Tip 4:

• Since the screen is fragile, install the screen carefully. Especially flexible cables. Please search and watch the YouTube video tutorial before installation, and then follow the steps to replace it, or ask a professional to help you replace it. We strongly recommend professional installation-returns of parts damaged during installation are not accepted.

Tips after installation:

• 1. Do not put pressure on the four corners of the screen, otherwise it will be easily damaged.
• 2. Make sure that each screw is replaced in its initial position.
• 3. If your phone has problems after installation, such as unable to power on, touch problems, home button not working, flickering, lines on the screen, etc., please follow these steps:
• ① Reinstall all flexible cables and check whether all flexible cables are intact.
• ② Restart the phone
• If you have any questions, please let us know and we will try our best to resolve the issue.