Automatic Water Flow Sensor Switch 220V with 1/2 to 3/4 Thread Connector and Heart Pump

Specification:
Brand new
Power: 120W
Voltage: AC220V
Current: 0.5A
Water temperature range: ≤100℃
Pressure: ≤0.6Mpa
Female port thread dia: OD: approx.29mm, ID: approx.25mm, hole: approx.13mm
Male thread (fit dia): OD: 20mm, ID: approx.12mm
Body size: approx.67*50*35mm
Cable length: approx.26cm
Feature:
Durable and practical.
Stable and .
High temperature, low water pressure start.
Detect whether the water flow line and traffic is to meet the requirements, at the same time by switching electrical contacts provide a output ON or OFF state.
Equipment system by detecting the presence of a or a control current to pass therethrough (flow switch electrical contacts pass, off state) on the switch to determine the working status of the piping system.
Principle:
When the water flow is more than 0.75L/min, the core displacement under the action of water and promote the role of the magnetic source generates magnetic sensor outputs "1" switching , the input to the device control system, by expanding the power amplification to achieve the purpose of the water flow control.
When the water flow is less than 0.75L / min flow rate, the core magnetic source drive return under the action of the reset spring force, so that the sensor outputs "0" switch to stop operation of the system.
Package included:
1 x water flow sensor switch
Note:
Please allow 1-2cm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer since monitors are not calibrated same.