Carsunshades Tire Inflator and Air Compressor For Car Auto Pump Portable

Carsun pumps 12V car tires is also appropriate for inflatable toys, beach floating beds, rubber dinghies, balls, bicycles, motorcycles, and so on.The tire unexpectedly leaks or receives an injection that can be used for first aid when you're heading to work on the highway, in the field, or in the morning. Maintaining the proper tire pressure helps save petroleum and guarantee safe driving. Just in case, it can be utilized with the vehicle.Which comes with a full set of inflatable nozzles that may be used for a variety of applications, including tires, rubber dinghies, air cushions, inflated toys, and balls.
USAGE
1. Insert the air nozzle on the rubber pipe head directly into the tire valve, and when you hear the sound of air escaping from the tire, it means that the air has been circulated, continue to tighten the air nozzle, at this time the air is no longer released.2. Insert into the DC12V cigarette lighter.3. When inflated, the instrument pointer rises with the tire saturation. When the pointer reaches the appropriate tire pressure (usually the tire pressure of the car tire is 223kpa=35PSI), take out the plug and air nozzle to finish the work.4. Please use professional ball needles and plastic nozzles equipped with this machine to connect with air nozzles to inflate balls and other pneumatic equipment.[notes]: 1. Do not use inflatable tires in large and overweight vehicles, such as trucks, trucks, container trucks, etc. 2. when in use, please start the car engine to increase the power, without consuming the power of the car battery. 3. This machine is limited to DC (DC12V) power supply, but not household high voltage AC (AC220V) power supply. 4. When inflating, please stop for cooling for 10 minutes after working continuously for 10 minutes to prevent damage to the air pump and accessories and prolong the life of the motor. When inflated, the rubber dinghy can work continuously for 30 minutes. 5. Generally, when the tire is inflated, it can reach the normal tire pressure of 30PSI in about 3-5 minutes, while the large tire will take a little longer; if the pointer of the meter rises rapidly to 50-100PSI at the beginning of inflation, it means that the air is blocked and the air does not enter the tire, so it is necessary to unplug the nozzle connector immediately and re-operate, otherwise the motor and instrument will be easily damaged. 6. when using it, do not leave the body, pay attention to the tire pressure at any time, do not be too saturated. 7. After using this machine, the nozzle wrench must be straightened to avoid rubber elasticity fatigue inside. 8. The plug of the air pump is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (fuse is 10A). 9. This machine should avoid dampness, heavy fall and sand and mud intrusion, avoid children playing with it, so as to avoid damage. 10. The pressure required for each type of tire is different. Please refer to the sign on the side of the tire, or ask the automobile manufacturer.