10 years warranty with 10 years battery MEANSAFE micro smoke alarm

⭐ MEANSAFE Smoke/Fire Detector ⭐
Protect your home and family with MEANSAFE’s advanced smoke detector. This is a state-of-the-art alarm designed to provide you with an early warning in the event of a fire.

Product Features
????️ Quality Guarantee: Built with reliable core chips for stable, dependable performance, ensuring your peace of mind.

⏳ Warranty: 10-Year Design Life ,free replacement if faulty Within 10 years of sale.

???? Safe & Convenient Test Button: Easily check the device's working status with the dedicated top-mounted button, ensuring functionality without compromising safety.（No need to climb up to turn off hush button or test）

???? Long-Life Power: Powered by a replaceable lithium battery (DC 3V) with an energy-efficient design, ready to use out of the box and designed to last up to 10 years under normal conditions.

???? Flame-Retardant Material: Manufactured with fire-safe materials to enhance safety and reduce potential risks.

???? Dual Alarm System: Features both audible (>85 dB within 3 meters) and visual (flashing red LED) alerts for timely detection, suitable for living rooms, bedrooms, and more.

????️ Wide Operating Range: Stable performance in various climates, from -10°C to +40°C, and  making it suitable for living room and bedroom and ship(anti-corrosion treatment).

???? Installation Information ????
Choose a location on the ceiling (wall mounting is not recommended for optimal smoke detection).

Remove the double-sided adhesive backing and stick the ceiling plate to the ceiling. For a more permanent installation, use the included screws.

Place the detector onto the ceiling plate and twist it clockwise until it locks into place.

???? How to Use ????
Once mounted to the ceiling and powered on, the detector works automatically.

Normal Operation: The red LED will flash once every 60 seconds.

Alarm: When smoke is detected, the loud alarm will sound. The alarm will stop automatically once the smoke clears.

???? Hush / Silence Function
This function temporarily silences a non-critical alarm (e.g., from cooking smoke) for about 10 minutes.

To Activate: Briefly press the HUSH/TEST button.

Indication: The red LED will blink once every 10 seconds.

Reset: After 10 minutes, the alarm will be fully active again. If smoke is still present, the alarm will sound again. This function can be used repeatedly.

✅ Testing Your Alarm
Test your smoke detector weekly to ensure it is working correctly.

Press and release the test button.

The alarm should sound a series of loud, short beeps, indicating the detector is functioning normally.

⚠️ WARNING: Do not use candles, open flames to test the detector.

⚠️ Troubleshooting & Maintenance ⚠️
???? Fault Indication
Signal: The alarm sounds two beeps approximately once every minute, and the red LED flashes twice in the same interval.

Action: This indicates a fault. Clean the detector (see maintenance) and test it again. If the problem persists, replace the smoke alarm immediately or contact your supplier if it is still under warranty.

???? Low Battery / End of Life Warning
Signal: The alarm sounds one beep approximately once every minute, and the red LED flashes once in the same interval.

Action: The battery needs to be replaced soon.

Open the battery compartment.
Replace the battery correctly, observing the positive (+) and negative (-) terminals.
If the detector still does not function after replacing the battery, please contact your supplier.
???? Warm Reminder & After-Sales Guarantee ????

⚠️ After-Sales support is applicable for the following scenarios (non-human damage):
❌ The product fails to work properly right after unboxing.
❌ The product has appearance defects such as damage or deformation.
❌ Malfunctions occur within a short period of normal use.

Thank you for choosing MEANSAFE for your safety needs.