12V 38mm Electric Fuel Oil Transfer Pump Submersible For Diesel Car Motorcycle New

Features:
1. Portable submersible oil pump with stable performance. Fully sealed and insulated.
2. Lightweight, easy to install and carry.
3. 3-meter cord, 16mm pump port diameter.
4. Suitable for large harvesters, agricultural machinery, construction machinery, large-wheel tractors, etc.

Description:
Material: Our f-uel transfer pump is made of stainless steel, which is rust-proof, non-toxic, corrosion-resistant, and durable. It can quickly and safely transfer oil, f-uel, water, or other liquids.
Product Dimensions: This pump uses a 12V/24V DC motor. Plug the 12V into your car battery or c-igarette l-ighter instead of plugging it into an outlet.

Basic Information: This is a practical spare part for your car on the road, suitable for small oil and gas transfer engines in any emergency.
Instructions: The red click is for connecting the positive terminal, and the black click is for connecting the negative terminal. Both positive and negative terminals must be connected correctly. It is easy to use, reusable, and economical.
This pump is designed for d-iesel f-uel and must be completely immersed in the liquid during use.

Specifications:
Color: Silver
Material: Stainless Steel
Dimensions: 38x38x150mm
DC 12V
Motor Speed: 8000rpm
Maximum Pump Operating Current: 1.5A
Flow Rate: 30L/min
Cable Length: 0.3mm² x 300cm
Tube Diameter: 16mm
Lifting Distance: 1.5-2m

Package Included: 1 x Electric F-uel Transfer Pump

Note:
1. Before operation, the d-iesel pump must be placed in the center of a d-iesel drum and cleaned thoroughly. Do not allow the pump to run idle.
2. When operating the pump, pay attention to the drum's load capacity; do not exceed the load capacity.
3. Do not pump flammable liquids such as gasoline and a-lcohol.
4. Confirm that the power supply voltage matches the voltage indicated on the f-uel pump. The voltage tolerance is ±5%. Pay attention to the positive and negative polarity.
5. Do not use the pump for more than 20 minutes at a time. Wait 10-15 minutes before resuming operation. Avoid continuous operation for extended periods.