220V Electric Heat G-un Power Tool for Home DIY with CE Certification and 1200rpm No-Load Speed EU Plug

About this product

Anti-slip design and heat dissipation holes: The handheld part adopts a raised point anti-slip design, which has low power supply and feels safe in the hand. The heat dissipation holes at the tail of the hot air g-un can reduce the high internal temperature and extend the service life. Safe heat dissipation.

Versatile and ideal for DIY projects. Versatile and ideal for DIY projects. Our double-fly heat g-un can be used to burn powder, remove old paint, heat shrink film, defrost and remove dirt, etc. If you like DIY, it can be used to make handmade candles, rubber stamps, etc.

Safety hot air g-un There is a temperature control device in the circuit of the hot air g-un. When the current increases abnormally to a certain height and abnormal heat occurs, the temperature control will automatically cut off the power to protect the safe operation of the circuit and eliminate the occurrence of dangerous situations such as high temperature melting and fire. Made of ABS with heat resistance, low temperature resistance and other functions. The outlet is made of stainless steel.

Easy to use Just keep about 5-6cm away from your DIY work and apply heat at an angle of about 45 degrees to avoid injury. The temperature cannot be adjusted, but it can reach about 200 degrees Celsius/392 degrees Fahrenheit in a few seconds, heating up quickly and working its magic.

Protective material The mini heat g-un is made of high-quality ABS plastic shell and stainless steel interior, portable, simple and durable. In addition, it comes with a steel bracket that can be used to support it when you are tired or not using it, making it safe and convenient.

Product Description

Mini Heat G-un: High quality, durable and portable, you deserve it. Keep a distance of 5-6 cm from the work and heat at an angle of about 45 degrees until it is finished. It not only adds hardness but also brightness. 100% b-rand n-ew high-quality ABS and PC plastic material, equipped with a stainless steel bracket that can rotate 100 degrees.

It is very compact, durable and practical. There are heat dissipation holes on the left and right sides, which can reduce the internal temperature and extend the service life. Our excellent compact heat g-un can be used to heat shrink film, embossing powder, rubber stamps, and is an alternative to a toaster or oven, the polymer clay will become hard and shiny, but in theory, in an abstract way, it can reach about 200 degrees in a few seconds. But do not use it for more than 10 minutes, just turn it off and on again to work continuously

Specification:

Material: ABS + PC plastic

Cable length: 39.4 inches / 100 cm

Rated power: 300W

Rated voltage: 220V

Power: 50-60Hz

Working time: 10 minutes

Power type: AC power

Type: constant temperature

Key Takeaways

• Heat g-un tool with 220V rated voltage delivers hot air for DIY projects and features a durable build for extended use.
• Electric heat g-un includes CE certification and operates at a no-load speed of 1200 rpm for consistent airflow.
• Heat g-un setup supports home use and customization options, designed for easy handling during tasks.
• Heat g-un fits typical home DIY applications and supports heat shrinking and s-oldering tasks safely.
• Heat g-un suits indoor craft projects and requires avoiding prolonged exposure to heat for safety.

Product Terms Explained

Heat g-un:

This tool uses electric power to generate hot air for various heating applications. It is commonly used in crafts, s-oldering, and plastic shrinking.

Usage:

Designed for home DIY projects, this heat g-un supports tasks like s-oldering and plastic shrinking. It is not intended for industrial use.

Plug Type:

The heat g-un includes an EU plug, compatible with European electrical outlets. It requires an adapter for use in regions with different plug types.

Rated Voltage and Speed:

The heat g-un operates at a rated voltage of 220V, suitable for regions with this electrical standard. It has a no-load speed of 1200 rpm, providing steady airflow.

Certification:

The heat g-un holds a CE certification, indicating it meets European safety and quality standards.

Package includes:

1 x heat g-un

1 x manual

Warn:

-Do not touch with water! Do not touch the hot nozzle.

-Do not use outdoors. Please keep it out of reach of children. Keep a distance of 5-6 cm between the heating tool and the object.

-Do not use continuously for more than 10 minutes to avoid overheating.