3 colors Under Cabinet Lighting USB Charging Motion Sensor Lighting 50CM-3 models

【Note】Upon receipt, please charge the cabinet under-cabinet light immediately. Ensure it is fully charged before use. 【3 Colour Temperatures and Dimmable Lighting】Using the function button under the cabinet light, simply press the function button briefly to switch between warm white (2700K), natural light (4000K), and daylight white (6000K) colour temperatures. A long press on the function button allows for smooth brightness adjustment to meet your various needs, making it ideal for under-cabinet lighting. 【Motion Sensor and Light Sensor】Set the motion sensor light to indoor automatic mode. When it detects human movement within a 120° angle and up to 1 foot, the light will automatically turn on and automatically turn off after 30 seconds without detecting movement. No manual switching required, automatic lighting reduces the risk of dropping or injury due to poor vision, especially suitable for dark or low-light environments. 【USB Rechargeable Wall Cabinet Light with Battery Power】Our wall cabinet light with motion sensor is equipped with a built-in rechargeable 1000mAh lithium battery. In continuous power mode, it can maintain lighting for 5-6 hours at maximum brightness. In automatic mode, it can last for 20-30 days, with an illumination frequency of 10-20 times per day, each lasting 30 seconds. The Type-C charging interface is convenient for charging and supports universal Type-C interfaces, eliminating the need for a dedicated charger (5V). 【Wide Range of Applications】Cabinet under-cabinet lighting has a wide range of applications. In automatic mode, it conveniently provides lighting in dark environments, such as kitchens, cabinets, wardrobes, staircases, bookshelves, workbenches, and storage cabinets. In constant-on mode, it provides decorative lighting, such as inside display cabinets, wine cabinets, and display cases. 【Easy Installation】Each unit of this motion sensor wardrobe light comes with adhesive magnets and metal plates. Attach the magnet to the light, then stick the metal plate to the desired installation location. Installation is completed via magnetism, allowing for easy removal when charging or repositioning the light. Additionally, the cabinet light can be installed on any iron material. 【Important Note】The surface of the new product is covered with a scratch-resistant transparent film. Please remove it before use.