3D Frosted Window Film Sticker for Stained Glass, UV - resistant, 30x200cm

Partial privacy protection blurs unwanted views. The irregular texture of the 3D pattern decorates your personal space. It has an adhesive surface, is easy to install by peeling and sticking, and is easy to cut and trim.

Main Features:

• Partial Privacy: It gives you a pleasant sense of security at home.
• Self - adhesive: Simply use water or soapy water for installation; no sticky glue is required.
• Unique Pattern: Decorate your home windows with elegant patterns.

Installation Instructions:

1. Measure the surface and cut the film. Leave an extra inch margin on each side for easy adjustment.
2. Thoroughly clean the target surface and ensure it is clean enough without any dust.
3. Remove the transparent backing film on one short side. (Very Important!!!)
4. Spray a large amount of water or soapy water on both the smooth side of the window film and the window, then install the window film on the window.
5. Use a soft towel or a squeegee to wipe the film from front to back to ensure that all bubbles and water are completely removed.
6. Cut the edges and use a cloth to flatten the film. And there you go!

How to Remove the Transparent Backing Film:
Step 1 - Moisten a corner of the window film and use your fingers to twist it for a while to loosen the bond between the window film and the transparent backing film.
Step 2 - Stick an adhesive tape on the corner side of the transparent backing film. (We have also attached a small adhesive tape to each roll of window film for your convenience), then press it firmly.
Step 3 - Then you can easily separate the transparent backing film from the window film.