3D Frosted Window Film Sticker for Stained Glass, UV - resistant, 30x200cm

Installation Instructions:

Measure the surface and cut the film. Leave an extra inch margin on each side for easy adjustment.

Thoroughly clean the target surface and ensure it is clean enough without any dust.

Remove the transparent backing film on one short side. (Very Important!!!)

Spray a large amount of water or soapy water on b oth  the smooth side of the window film and the window, then install the window film on the window.

Use a soft towel or a squeegee to wipe the film from front to back to ensure that all bubbles and water are completely removed.

Cut the edges and use a cloth to flatten the film. And there you go!

How to Remove the Transparent Backing Film:

Step 1 - Moisten a corner of the window film and use your fingers to twist it for a while to loosen the bond between the window film and the transparent backing film.

Step 2 - Stick an adhesive tape on the corner side of the transparent backing film, then press it firmly.

Step 3 - Then you can easily separate the transparent backing film from the window film.