4K Solar Wireless Security Camera for Courtyards / Farms / Gardens

Welcome to SKY Mall! We care for every home.?

• A no-wiring, easy-install, ?camera ? perfect for elderly care, home security, and shop surveillance all in one! Shop now and give your family 24/7 uninterrupted safety.
• If you're interested in our product, please hit follow ? so you'll be the first to know about new updates.
• Before shipping, we carefully inspect every product to ensure it arrives in perfect condition.
• If you have any feedback, please leave us a message ? we'll use your suggestions to improve and give you a better shopping experience.

Mobile APP Download & WiFi Pairing (Key steps)

• Download the corresponding monitoring APP
• (The APP download QR code is available on the body sticker or in the manual ? priority should be given to the instructions on the device itself.)
• For iOS: search the name in the App Store and download.
• For Android: download from the app store or scan the QR code on the manual.
• Pre-setup on your phone
• Connect your phone to a 2.4GHz home WiFi (the device does not support 5G WiFi ? you must switch to 2.4G).
• Turn on Bluetooth and location permissions on your phone, and grant the APP full access (photos, microphone, notifications).
• APP pairing process
• Register/log in to your APP account, and tap the ?+ Add Device? button at the top right of the home page.
• Select device type: Camera / WiFi Pan-Tilt?
• Confirm that the indicator light is flashing and the voice prompt is heard, then tap Next.
• Enter your home 2.4G WiFi name and password (case-sensitive).
• Choose one of two pairing methods:
• Sound wave pairing: point your phone speaker at the camera; the APP emits a sound wave, and the device will say ?Pairing successful? once received.
• QR code pairing: the APP generates a QR code; hold the screen in front of the camera lens to scan.
• Wait 30?60 seconds ? the APP will show the device online. You can then customise the device name (e.g. Living Room, Hallway).
• Reset (if pairing fails)
• There is a SET reset pinhole at the bottom/side of the body. While powered on, use a toothpick to press and hold for 5 seconds. You?ll hear a reset voice prompt and the indicator will flash rapidly ? then you can re-pair.
• Note: Due to network or phone fluctuations, connection may fail occasionally ? that?s normal. Please take your time and re-read the manual to try pairing again. It?s not a product defect ? thank you for your understanding.

Product Information

• Waterproof rating: IP65
• Working temperature: -10 to 50 ? C
• Rotation angle: 360 ? horizontally/150 ? vertically
• Support type: Fixed screw
• Infrared night vision distance: 15 meters
• Output devices: microphone, speaker
• Operation method: Through mobile application

feature

• Autonomous energy: Integrated solar panels, no external power source.
• Flexible installation: No power cord required, fre e insta llation.
• Energy saving: intelligent sleep mode, low power consumption.

function

• High definition image quality: resolution 1080P,
• Detection and alarm: detect motion and trigger alarms.
• Remote control: Adjust the angle and focus through the application.
• Voice interaction: Partial voice recognition, two-way communication.
• Storage: Local (SD card) and cloud storage (compatible up to 128GB, available separately)
• Connectivity: Wi Fi, 4G/5G, cable.
• Scaling variables: manual or electric, partially remotely controlled.
• Infrared night vision: No visible light required, very suitable for night use.

Usage scenarios

• Family: Courtyard, porch, balcony. 24-hour monitoring with infrared night vision function to protect your personal property.
• Commercial use: store, warehouse, parking lot. Prevent theft and destruction, provide high-definition transmission.
• External: farms, pastures, nature reserves. Hidden installation, stable operation.

Installation steps
?

• Initial charging: Expose the camera to sunlight for 3 to 5 hours.
• Choose location: a place with ample sunlight, no glare, and no standing water.
• Required materials: drilling machine, wrench, level, screws, cables, waterproof tape.
• Marking and Drilling: Mark and drill holes for the bracket.
• Installation bracket: Secure the bracket and ensure its stability.
• Connection: Connect the power supply and network cable, and protect the connection with waterproof tape.
• Camera installation: Install the camera and adjust the viewing angle.
• Test: Connect the camera to the monitoring system and check the clarity of the image.

Instructions for Use

• Download the application and create an account.
• Turn on Wi Fi/Bluetooth and scan the QR code.
• Add a camera to the application and follow the prompts.
• If the connection fails, please restart the camera.

Precautions

• Ensure stable installation: If installing the camera on the ceiling or other locations, be sure to hang it securely to prevent the camera from falling and causing injury.
• Function adaptation: Install to avoid obstruction and cover target areas (such as doorways); Choose one with infrared night vision at night and confirm that the infrared distance is compatible.

Kind Reminder
Regarding image color difference: Due to differences in shooting lighting and display devices, there may be slight color difference in the image, but it does not affect normal use.
Regarding the operation guide: The device's built-in manual is the most accurate and comprehensive operating basis, which can help you fully understand all the functions and specific settings of the device.