5pcs Professional Front End Service Tool Kit, Pitman Arm Puller, Ball Joint Separator Tie Rod Remover Tool

Product description

Package List

1x Ball joint separator

1x Tie rod end and ball joint remover

1x Conical pitman arm puller

1x Pitman arm and tie rod end puller

1x Pitman arm puller

1x Red case

Wide Usage

Ball joints require regular maintenance and replacement on average 75,000 to 150,000 miles or it may cause inconvenience and even safety hazards such as steering failure, instable driving and ball joint fracture. YSTOOL front end service tool kit is a necessary tool set in your garage for removing the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts.

Compatible with most imported and domestic minicars, compact cars, mid-size cars and light pickup trucks. May not fit for most full-size cars, mid-size and heavy-duty pickup, mid-size and heavy-duty trucks.

Ball Joint Separator

This separator with 7/8" jaw spread, 1-3/4" throat depth and 1-1/16" & 2-1/8" (26 & 53mm) jaw opening.

Apply to domestic and import front wheel drive vehicles, to separate multisize ball joint from spindle support arm.

The design of press-type can separate ball joints without damaging the boots.

Work with 21MM ratchet wrench.

Tie Rod End and Ball Joint Remover

This universal puller tool with 0 to 2-1/2" jaw spread and 3-1/8" throat depth, has adjustable swing arms

Designed to remove multisize tie rods and ball joints.

Wedge shape jaw makes it easier to insert into the ball joint opening.

Work with 17MM ratchet wrench.

Conical Pitman Arm Puller

This puller with 3/4" jaw spread

Apply to pitman arms on minicars, compact & mid-size cars, and light-duty trucks.

Conical design allows this tool to be installed on pitman arms firmly.

Work with 18MM ratchet wrench.

Pitman Arm and Tie Rod End Puller

This puller with 1-1/8" jaw spread, 2-1/2" throat depth

Designed to work as pitman arm remover on most small rear wheel drive vehicles and also can be used as a tie rod end puller for most small domestic and import cars.

Work with 19MM ratchet wrench.

Pitman Arm Puller

This puller tool with 1-3/8" jaw spread and 1-7/8" throat depth

Fit pitman arms on minicars, compact & mid-size cars, and light-duty trucks.

Work with 17MM ratchet wrench.