Car Power Inverter 6000W 12V To 220V Converter

1. The inverter comes with a free cigarette lighteer and 2pcs battery clips providing 500 watts continuous power, 6000 watts peak power (please make sure the total rated power of connected devices is ≤500W).2. This is a modified sine wave inverter, not applicable to appliances which work by built-in motor, hair dryers, air conditioners, coffee machines, water pumps, induction cookers, refrigerators and microwave ovens , etc. Make sure the total rated power of connected devices is ≤ 500W3. Tighten the Positive (+) and Negative (-) terminals when the car converter is used.4. If the converter is directly connected to the cigarette lighteer. The highest output power should be less than 150W. If it is more than 150W, we strongly recommend using the Crocodile clips on a battery, because the car cigarette lighteer might not afford more than 150W.5. The car converter suitable for DC12V and car only, not applied for DC 24V and airplane.6. Please do not leave the inverter in the ON position before the car is started. It is easy to damage the inverter before connecting it to the battery. The correct operation is to connect the battery first, then turn on the power switch of the inverter.7. If you want to run an inductive load for a long time, it is suggested to purchase a pure sine wave inverter.8. It is normal for the inverter to heat up while you are using it. In order to get the best using results, please place the inverter on the flat surface, the working place should meet the following criteria:① Keep dry, do not let the inverter come into contact with water or other liquids, keep the inverter away from moisture or water.② Cool environment, keep the temperature between 0 degrees Celsius and 40 degrees Celsius. Do not place the inverter next to thermal vents or other devices. Try not to shine the inverter directly by the sun.③ If the input voltage display is low, the customer should charge the battery before using. Because the battery is off, the UPS is in a protected state.Characteristic:
Brand new and high qualityThis is a power inverter, using STM-chip technology and kinds of intelligent protection, high reliability.Widely used in cars, steamships, mobile post and telecommunication services, public security, emergency and other fields.The dual LCD digital display allows you to maintain the output voltage and battery voltage value at all times.Prompt function fault. In addition to the various sound instructions, it can also be displayed more intuitively from the display screen (eg battery undervoltage, battery overvoltage, overload, high operating temperature, short- output circuit, etc.).The overload delay closing function is added in the product to solve the sensitive problem of protecting the inverter when the soluble electric appliance is started.The small-power non-professional user market has increased the positive and negative pole feedback protection function.Intelligent temperature control oil sealing fan. When the inverter is working, it can work at a certain temperature, which is more energy-saving and quieter.MCU digital control, output wave type, more accurate frequency, accurate output voltage, fast response protection circuit.Specification:
Black colorOutput waveform: modified sine waveContinuous power: 500WPeak power: 6000WInput voltage: 12VInput voltage range: 9.5V-15.5VOutput frequency is: 50Hz for 220V model/60Hz for 110V model.Output voltage range: 110V ± 10% / 220V ± 10%Frequency: 50Hz/60HzInverter efficiency: 0.9Circuit topology: push and encourage typeNo-load current: ≤ 0.7ALow voltage protection: with a minimum protection voltage of 9.5VHigh voltage protection: with a maximum protection voltage of 15.5VOverload protection: YesOutput short circuit protection: yesReverse connection protection of positive and negative poles: yesOutput voltage stabilization: yesBuzzer protection: YesUSB interface: 2.1a x 2Input terminal connection mode: terminalOutput interface: international general plugSize: 16.3cm/6.4inch x 10.0cm/3.9inch x 7.7cm/3.0inch