Fully Automatic Water Level Control Float Valve

1/2" Fully Automatic Water Level Control Float Valve 1/2" Auto Shut Off Mini Float Valve No Need electricity Automatic Water Level Controller for Water Tank Water Towers

[Easy to install]It's a mini float valve,ball size is small,so easy to install,the male thread is 1/2 inch, we used BSP pipe thread,also the male thread is longer,it's perfectly to fit most of BSP thread connections. If your pipe thread is NPT,you just need to add a few PTFE TAPES on the male thread,then it works perfectly as well.
[Widely used]It's used for people to maintain the water level in a garden waterfall, on a yard fountain,for a rain gutter garden project,using it to make an automatic shut-off for swimming pools,for chicken coops,for automatic chicken water drinker,for cattle watering drought,for rain collection barrels in the outdoors etc.
[Working Water Pressure]The float valve works with 10 psi to 150 psi water pressure,if water pressure is too low or too large,the float valve will not suitable for using, it will not work or be damaged. Working Temperature:0~60 degrees
[Easy maintenance]The float valve comes with filter,the filter must be used in the water inlet,avoid sand and stone blocking the floating ball. [Kindly note]If you are using an automatic fill float of any kind indoors, please make sure you have an emergency overflow system in place. Auto fill floats of any kind can eventually malfunction and cause flooding. It's always best to set the lowest flow of water needed to maintain a full water level.