Infrared alarm, motion detector - 100 decibels

Installation Requirement and Instructions

1. Installation Requirement

• Since the motion sensor alarm has much higher infrared detection sensitivity when human body moves laterally with respect to the lens, please pay attention to the angle and height of the detector horizontal plane during installation, which has a great influence on the protection zone.
• During installation, please keep away from the hot and cold sources, such as hot and cold air outlet, air conditioning outlet, heater, air cooler, etc., to avoid direct door.
• The detection area can not have obstacles.
• The angle between motion sensor alarm the wall should be10 to 30 degrees. At this point, the detection distance is farthest.

2.Instructions

• The standby time is 20 seconds after power on and the motion sensor alarm will not detect signal within the 20 seconds, so you must leave the electronic leave detection area within 20s.
• 20 seconds later, if a person enters the detection area, the motion sensor alarm will have a delay of 5 seconds. This will facilitate the identification of the owner. After 5 seconds, if no correct password is received, there will be a alarm sound of 30 seconds. The alarm volume is 105 DB. 5 seconds after the alarm sound is over, if another person comes into the detection area, it will alarm again and again.
• During alarm, you can enter the correct password to end the alarm.

APPLICABLE LOCATION This motion sensor alarm can be situated to cover the front door, back door, garage, shed, outbuildings etc. This alarm is very suitable for your application, and the installation location is also very convenient.	MOVEMENT DETECTED This motion sensor alarm features a built in PIR motion sensor that will activate the alarm if any movement is detected. When the PIR sensor detects human movement the alarm will sound alerting you to a potential attack on your home or an intruder.	PROTECT YOUR PROPERTY This Motion Sensor Alarm is perfect for protecting your property against unwelcome intruders. With this motion sensor alarm, this alarm can help you protect your property. Detection range: Distance of 3-5 meters, angle of 105 degrees.

Note:

1. It is recommended that you regularly check the motion sensor alarm to make sure the work is normal, to avoid missing alarm.

2. When the power-on indicator is dark at startup, the alarm sound becomes smaller, and the false alarm rate of the infrared alarm is high, the battery voltage is generally insufficient, and the battery should be replaced in time.

Specifications and Packing List of Wireless Door Alarm