j ack Car labor-saving car hand-crank bracket s cissor

Description
- Condition: New
- Minimum Height: Approx. 90 mm
- Maximum Height: Approx. 360 mm
- Lifting Capacity: 2.0 T
- Material: Steel
- Net Weight: 2.1 kg
- Dimensions: 358.5 x 8.5 x 1.5 cm (L x W x D)
- Scope of Application: Suitable for small and medium-sized vehicles, such as cars, Buicks, Santanas, and other vehicles.

Package Contents:
- 1 S cissor 
- 1 Handle

Height and Capacity Curve:
This unit is designed to support the following loads at the specified heights. DO NOT EXCEED the rated capacity for each position.

Before Use:
- Before each use, check for abnormalities such as cracked welds, leaks, damaged, loose, or missing parts. - Immediately inspect the if you suspect it has been subjected to abnormal loading or impact.
- If the is damaged, it must be removed from service until it is repaired.

Instructions for Use:
- Insert the handle into the hole in its housing.
- Ensure the saddle is correctly positioned. To avoid damaging the , do not move it while the handle is inserted in its housing.
- To raise a load, hold the front of the handle with one hand and turn the rear of the handle clockwise with the other.
- To lower a load, hold the front of the handle with one hand and slowly turn the rear of the handle counterclockwise with the other.

Care and Maintenance:
- When the is not in use, the lifting arm must be fully lowered.
- Always keep the clean and ensure the screw and bearings are well lubricated.
- Store the crank handle carefully.

The s cissor , equipped with gears, can extend from 90 mm (closed position) to 360 mm, which is more than enough to lift most vehicles. Easy to use thanks to the chrome-plated crank with speed control.
Suitable for small and medium-sized vehicles, such as cars, Buicks, Santanas, Vientianes, and other vehicles.

Notice: Carefully read, understand, and follow all instructions before using this device. Do not exceed the rated capacity indicated by the height/capacity curve.
Only lift vehicle areas specified by the manufacturer. Follow the tire changing procedure according to the manufacturer's owner's manual. No modifications should be made to this product. Failure to follow these instructions could result in personal injury and/or property damage.