Water Pump - 130PSI 6L/Min - High Pressure - Black

Description

Pump Type: Straight Thread

Features

1. The diaphragm pump combines the advantages of a self-priming pump and a chemical pump. Install in a dry, well-ventilated location; the pump cannot operate underwater.

2. Made with a variety of imported, corrosion-resistant materials, self-priming, thermally protected, and designed for smooth operation, long-term continuous idle time, and long-term continuous load operation.

3. Fully sealed, high-pressure stable.

4. Rubber mounts absorb pump vibrations during operation.

5. When water pressure becomes too high, the pump automatically shuts down to protect itself and continues to operate normally. Water pipes will not burst, ensuring safety and durability.

6. Pressure protection: pressure switch power supply protection.

7. Maximum flow rate of 6 L/min, adjustable from 0.1 to 6 L/min as needed.

Maximum pressure of 130 PSI (9.0 kg) can be adjusted from 75 PSI (5 Gongjin) to 130 PSI (9.0 kg) depending on the requirements.

8. Operating mode: intermittent duty (continuous operation at different pressures at different times).

9. Media usage: water or solvent with a pH value of 5-8, oil. Service life: over 500-1000 hours of continuous operation.

10. Pressure switch type: when the water supply is interrupted, the power is automatically cut off and the motor stops. When the water supply is restored, the motor automatically restarts.

Specifications:

Volts: 12V DC, 220VAC (220V AC - Transformer required for operation)

Amps: 6A

Rated Power: 70W

Pressure: 0.90MPA (MAX 130PSI)

Flow Rate: 6L/MIN (6.0 liters per minute)

Operating Environment: No oil, no strong corrosive substances, no acids or alkalis, no solid particles in the liquid;

Average Temperature: 0°C - 100°C

Inlet and Outlet Size: 10mm

Size: 16.5 x 10 x 6.2cm

Type: Right-hand thread

Weight: 598g
Package Includes:

1 x Diaphragm Water Pump