Liitokala Lii-S2 Lii-500S LCD Battery Charger, charging 18650 3.7V 18350 26650 18350 NiMH lithium battery, smart 18650 charger

Lii-500S function

1. New touch control function;

2. Four optional charging currents: 500mA * 4 / 700mA * 4 / 1000mA * 4 / 2000mA * 2;

3. Two discharge currents: 250 mA * 4/500 mA * 4;

4. Different batteries of different specifications can be used (18650/26650 21700/ AA / AAA);

5. This product uses a separate LCD display, charging and discharging (mode). Voltage (V).

    Current (mA). Time (h). The capacitance (mAh) parameters are clear at a glance;

6. LOAD, UNLOAD and TEST modes can work simultaneously; independent setting

    Charge and discharge capacity detection / normal capacity detection function;

7. A variety of protection functions: overcharge and overdischarge, short circuit,         

    temperature,

0V voltage activation function, 1.65V-2.2V no charging function, intelligent identification

Insufficient battery and reverse battery detection protection;

8. With standard 5V / 1000mA USB output function (only valid when connected to AC power);

Lii-500S parameters

Input voltage: DC 12 V / 3.0A

Output voltage: DC 4.2 V / DC 1.48 V.

Output current

Lithium battery charging current: 500mA * 4 / 700mA * 4 / 1000mA * 4 2000mA * 2

NiMH battery charging current: 500mA * 4 / 700mA * 4 / 1000mA * 4

NOR TEST (normal capacity detection mode)

4-channel independent fast detection, 

regardless of lithium ion/NiMH battery.

Enter NOR TEST----Charging batteries---- Battery discharge----Full again/End           

Fill the battery first, then discharge the battery and record the  discharge capacity to detect the battery capacity, then fully  charge the battery.

FAST TEST (fast capacity detection mode)

4-channel independent fast detection,  regardless of lithium ion/NiMH battery.

Enter FAST TEST----Battery discharge---- Charging batteries---- Full again/End

Is to discharge the battery first, then fill the battery and  record the charge, so as to detect the battery capacity;

The charging current is 300mA/500mA, and the discharge current defaults to 250mA;

The charging current is 700mA/1000mA, and the discharge current defaults to 500mA; 

Battery specifications: 26650, 21700, 18650, 18350, 20650, 14500, AA, AAA, etc.

Discharge current: 250 mA / 500 mA

USB output: 5 V --- 1000mA

Termination method: intelligent voltage monitoring

Dimensions: 162 mm (length) * 100 mm (width) * 36 mm (height).

Order description

Lii-500S and adapter: Lii-500S charger + 12V / 3A adapter + manual

Lii-500S full: Lii-500S charger + 12V / 3A adapter + 12V car cable + manual 

Note: The Lii-500S charger test results are for reference only and do not make any professional proof.

LII-S2  Smart USB LCD Charger

- Auto-Polarity Detection

- Strong Visible Digi-dispaly

- For All Rechargeable Batteries

( Ni-MH/Cd 1.2V ; Li-ion 3.7V / 3.8V ;  Li-Fe 3.6V )

AUTO-POLARITY DETECTION

Automatically detects the polarity of the battery. There

is no polarity distinction, it is safer.

Strong Visible Digi-display

HD digital display. 175 degrees visible.

Clearer than the LCD, better visibility.

For 4 Type Rechargeable Batteries

For Li-ion 3.7V-3.85V / Ni-MH/Cd 1.2V / Li-FePO4 3.2V

Li-ion / IMR/LiFePO4: 26650, 21700 20700, 18650, 18490, 18350,17700,

17500, 16340 (RCR123), 14500, 10440

Ni-MH/Cd: AA, AAA, A, SC, C size