Mercury Elite 2200u Smart UPS with Built in AVR - black

Capacity: 22w00VA/1320W
PF: 0.6

Input:

• Nominal Voltage: 220 VAC
• Voltage Range: 140-300VAC(Double boost)
• Frequency Range: 50/60Hz (Auto Sensing)
• Input Type: Srchuko Power cord
• Input Breaker: YES

Output

• Output voltage: 220 VAC
• Boost Ratio: 1.2/1.4
• Buck Ratio: 0.85
• Output Voltage Range(batt.mode): £10%
• Frequency Range(batt.mode): 50/60Hz +/- 1%
• Transfer time: 4ms Typical
• waveform (batt.mode): Simulated Sine-wave
• Outlet Type: UN*4
• Full Protection: Overload, Short Circuit,
                             Over discharge and Over charge.
• Line mode overload: (110%10)% fault after alarm 1 min
  *  (120%10)% fault immediately
  Battery mode overload: (110%10)% fault after alarm 1 min
  *  (120%10)% fault immediately

Battery

•  
• Battery Voltage: 24V
• Battery type&number: 12V/9AH*2
• Typical Backup Time(Based one PC): 60mins @ 1 PC Load With 15" monitor
• Typical Recharge Time: 8hours to 90% of capability

Indicators
 

• Display: LCD
• Alarm: Battery mode: Sounding every 30 seconds
• Low battery: Sounding every 2 seconds
• Over load: Sounding every 0.5 seconds
• Fault: Continuous sounding

Physical:

• Dimension(W • H * D)(mm): 148mm x 178mm x 298mm

Interface

• USB Port: YES

Environment

• Temperature & Humidity: OC 10 +40 C, O to 90% Relative Humidity (Non-condensing)
• Noise Level: Less than 45dB