WakeView 20W Mini Hot Melt Glue Gun - Yellow, 30 Glue Sticks, Plastic & Aluminum, UK Plug

WakeView Home Industrial Mini Glue Gun 20W Hot Melt Glue Gun DIY Hot Temperature Electric Repair Tool with 7mm Glue Sticks

Instructions:

• 1. This series of products can be applied to rubber strips with a diameter of 7-7.5mm.
• 2. Insert the rubber strip from the end of the glue gun, send it into the barrel, plug in the power supply and preheat for 5-8 minutes. Pull the trigger to extrude the sol and control the amount of glue.
• 3. During use, if you can't use up one adhesive strip at a time, you don't need to take out the adhesive strip. You can plug in the power supply to warm up for 5-8 minutes before using it directly.

About hot melt glue gun:

• Material: Plastic & Aluminum
• Working power: 20W
• Working voltage: 100 to 220V
• Working temperature: 180℃
• Nozzle diameter: 0.070-0.078 inch
• Warm-up time: 5-8 minutes
• Cable length: 55 inch

About glue sticks:

• Sticks Color: Transparent
• Cure time: 15-30S
• Glue sticks length:7mm*15cm

Package included:

• 1 * Glue gun
• 30 * Glue sticks(7mm*15cm)

Tips:

• 1.To prevent from scalding, please do not touch the solution of the glue that out from the gun.
• 2.In order to do your job smoothly, please preheat the glue gun for about 3-5 minutes( the warm-up time) before using.
• 3.The glue stick cannot be taken down once be used.