868MHz Garage Door Command Duplicator HSM2 HSM4 868 Digital D302 382 BHS110 Remote Control for Garage Gate

868MHz Garage Door Command Duplicator HSM2 HSM4 868 Digital D302 382 BHS110 Remote Control for Garage Gate

• Copy by face to face 
• Many uses including some car alarms, home alarms, panic buttons garage door, rolling curtains, etc. 
• Copy 99% fixed code & learning code remote 
• The remote you have, which the chip number shows: PT2240 PT2260 PT2262 EV1527 FP527 AX5326 PT2262 PT2242 HT600 HT680 HT6207 HT6010 HT6012 HT6014 AX5326-4 SMC5026 SMC5326-3 SMC5326-4 SMC918 SMC918-3, etc. 

How to Program:

• Step 1: Factory testing code deleting. Simultaneously press and hold the button Arms and button Disarm until LED flashes 3 times. Keep pressing the button Arm. Release the button Disarm then press the button Disarm slowly 3 times, LED flashing. Release button Arm. The factory code is now deleted. If all has been done correctly then after a short pressing of any button LED light will not flash.
• Step 2: Place the original remote control and copy the remote control as close as possible together (back to back). Press and hold one button on your original remote and the button on copy remote control, which you wish to be programmed on at the same time for approximately 3 seconds. The LED indicator then flashes three times, followed by a continuous fast blink, indicating that the button is successfully copied. Repeat the above clone step for other buttons you wish to copy.

Specifications:

• Frequency: 868.3MHz

Compatible with:

• HS1, HS2, HS4 868
• HSE2 868
• HSM2, HSM4 868
• HSP4, HSP4-C 868
• HSD2-A, HSD2-C 868
• HSZ1, HSZ2 868
• Digital D302 868
• Digital D304 868
• Digital D313 868
• Digital D321 868
• Digital D323 868
• Command 131 868
• BHS110  
• BHS121  
• BHS130 
• BHS140 
• BHS153  
• BHS211 
• BHS221

Note: 

It can not copy rolling code remotely.

Package Included:

• 1 x Remote Control
• 1 x Battery
• 1 x Keychain
• 1 x User Manual