Winner Transfer Laser Dark 100 Sheets Transfer Paper Printable Vinly For Cotton For Heat Transfer Machine A4

IRON - TRANSFER STEPS

Set iron to Cotton/Jeans Setting and TURN OFF steam.Apply FIRM, EVEN and HEAVY pressure and iron each area of the image for 5 seconds. Circularly press and iron the image. (A4 size image, press 3-5 minutes. 1/2 A4 size image, press 2-3 minutes. 1/4 A4 size image, press 1.5-2 minutes ), Ensure that all areas of the image is ironed, especially the corners and edges.

 

EASY PRESS - TRANSFER STEPS

Temperature and Time may vary based on easy heat press type and image size. Suggest you do a test before transfer onto t-shirts.

Suggest set time and temperature as below:

A4 size image, 150°, 120 seconds.

1/2 A4 size image,  150°, 90 seconds.

1/4 A4 size image,  150°,30 seconds

At first, heat press the whole image slowly from one side to the other side. Apply HEAVY pressure on each area of the image for 10 seconds, circularly iron the whole image 4 times (80 seconds in total). At last, heat press each corner of the image for 10~20 seconds. NOTES: If the corner peels off, cover the teflon paper(in the pack) and heat press it for another 10~20 seconds.

 

HEAT PRESS - TRANSFER STEPS

Set Temperature to 145°-150°

Set Time to 15 seconds.

Apply MEDIUM pressure.

 

1 PRINT

Print your design on the BLANK Side of transfer paper.Laserjet Printer Settings:Set Paper Type to Label Paper.Choose 120g-180g.No MIRROR Printing.

 

2 CUT & PEEL

Cut out your design: Use scissors or cutting machine, such as Cricut, Silhouette and more.2 Peel your design from the backing LOGO paper.

NOTES: Transfer Paper is composed of two layers - the BLANK film and the backing LOGO paper.

 

3 PLACE

1 Remove Creases: Place your t-shirt on a SOLID surface (Don’t use ironing board as it’s too soft) and use your，ironing tool to smooth out creases on t-shirt

2 Place your design facing UPWARD onto appropriate position of T-shirt.

3 Cover it with Teflon Paper (included in the pack). NOTES:The teflon paper both sides can be used. No wrong side.

 

4TRANSFER 

Press with heat press machine: temperature145℃-150℃，time 10s to 15s

 

5 REMOVE TEFLON PAPER

After ironing done, peel off teflon paper in a quick and smooth action.

 

6 DONE Congratulations! Your DIY image transfer has been done. Enjoy!

 

WASHING  INSTRUTIONS :

1.Don’t wash within 48 hours after transfer.2.Wash the garment before wearing.3.Don’t use bleach or alkaline detergent.4.Turn the garment inside out when washing.5.Don’t soak to wash.6.Full spin cycle, cold water washing.7.No delicate washing.8.No tumble dry.9.Remove garment promptly after washing, colors may bleed if left wet too long.10.Unfold the transferred image, hang to dry naturally.

 

STORAGE  INSTRUCTIONS:

1.Keep the image facing outside when fold the garment.2.Store the garment in a dry and cool place.3.Keep the unused transfer paper sealed and preserved.