915 Generation 1Set Car Dent Puller Repair Tools Hail Remover

The following is the detailed introduction about our products:


About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
53706. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !Size: 27x15x8cm
Weight: 570g

How to use the tools?
1. Clean damage surface with a clean wet cloth;
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes;
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is);
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
6. When dent was removal, clear the glue by alcohol with plastic shovel;
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired.
Colour: Gold+Blue
Material: Metal+Plastic

Package Contents:
1 x gold puller
18 x blue tabs
4 x aluminium alloy tabs
3 x glue stick(11x27mm)
1 x shovel
1 x English manual

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.