915 Generation Brushless Sensored Motor for Electric Bike 190KV 2450W for

12awg high strand silicone wire with 4.0mm gold connectors.
Both support sensor and sensorless mode!
6354 190KV EPOWER Motor (Fits 63mm Motor Mount) Max Power: 2450 Max Current: 65 Amps
Max Volts: 12S
Max : 7Nm
Motor Resistance: 0.053Ohm
Recommend ESC: 3-12S 50A ( FSESC4.12 50A or FSESC 6.6 60A )
Weight: 1.23 lb / 0.56 kg
The motor length:54mm
The motor diameter: 63mm
SHAFT: Diameter 8mm, 24mm length, 3x3x15mm keyway slot.
Motor Wire: 130mm silicone 12AWG wire with 4.0mm Gold Connector Male.
Wire configuration:
Blue: A
Black: B
Yellow: C
BLDC Motor
The number of pole: 14
Sensor Wire: Standard RC Sensor Wire JST- 6pin 1.5mm pitch
Internal PCB with 120 Degree Hall Effect Sensors.
Motor can be used with or without a sensor. Sensorless operation is most common. Sensor Wires required to use with .
Wire configuration:
Red: 5v
Blue: A
Yellow: C
Green: B
Black: GND
Stator: Lamination Japan steel
Reference Information:
The screws used for the motor are metric . Using motor mounts, we recommend using Socket Cap .
Screws to mount the motor are not included with the motor.
The key for keyawy is not included with motors for shipping
Wire configuration is random, 't accept the specified, Does not affect actual use
colour: black
Material: composite material Package Contents:
1 x 6354 Motor Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.