915 Generation ELRS -24GHz Receiver 5Channel PWM Output Suitable for Long-Distance Fixed-Wing Helicopter Model Car Model DIY

Parameters for -receiver is based on the ExpressLRS project an open-source RC link for RC applications ExpressLRS to achieve the best possible link performance in both speeds latency and range This makes ExpressLRS one of the fastest RC links available while still offering long-range performance
ExpressLRS now supports direct PWM output from receivers that have been specifically designed for this mode for ELRS -receiver features PWM output for the application of fixed-wing helicopters RC boats and etc and supports failsafe function which can protect RC models from out of control Besides the plug-and-play design makes it easy and friendly to use
Note To work with PWM receiver make the TX and firmware is ELRS V200 Comparision in for ELRS Receivers
What is the major difference between -receiver Nano receiver and Lite receiver -receiver is the first ELRS receiver with PWM output on for It is widely used in fixed-wing helicopters RC boats and etc Weighing about 45g with an antenna means that a FPV drone can not to carry With the plug-and-play connect ports -receive is easy to use and does not need to solder
Nano receiver 24G version is the first and so the only receiver with power amplifier PALNA It has 100mW telemetry output and better sensitivity when range Lite receiver doesn't have a PALNA on so telemetry power is as what the RF chip SX1280 came with 17mW

Item for ELRS -Receiver
Material plastic
Color as shown
Beside Nano receiver comes with normal external Dipole T antenna Lite receiver has SMD ceramic antenna and in it is not so long range
-receiver is used for fixed-wing helicopter RC and boats High mmend the Nano or Lite receiver to on a drone Especially on 65-85mm whoop drones with limited space and need lightweight Lite receiver is a better
Item for ELRS -Receiver
Weight 45g with antenna
Antenna IPEX MHF T antenna recommend 80mm Dipole T Antenna
PWM channel 5 channels
Serial output protocol PWM or CRSF
Size 19mm x 32mm x 9mm without antenna
MCU ESP8285SX1280SX1281
Telemetry power 125dbm17mW
Frequency bands 24GHz
Input voltage 5V~9V DC @ "" pad
Default firmware version ExpressLRS v20
Adapted RC Model Type Multirotors Fixed-wing Helicopters RC RC Boats and etc

Package contents
1 x 24GHz Receiver

Only the above package content other products are not included
Note Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm