This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeComputingComputers & AccessoriesComputer ComponentsNetwork CardsFor Raspberry Pi PoE HAT 5V2A Active Power Over
GH₵ 265.07
GH₵ 498.2747%
2 units left
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 28.07 to Tema
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 28.07
Ready for pickup between 11 June & 14 June when you order within next 16hrs 3mins
Door Delivery
Delivery Fees GH₵ 39.97
Ready for delivery between 11 June & 14 June when you order within next 16hrs 3mins
Return Policy
Free return within 15 days for all eligible items.Details
Warranty
None
Seller Information
Glittering
66%Seller Score
18 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Excellent
Customer Rating: Excellent
Product details
The following is the detailed introduction about our products:
This PoE-Wod device provides an efficient solution for delivering power to a Raspberry Pi 3B+ or 4 over 328ft of network cable.
This device allows power to be carried on 10/100/1000 networks with either 802.3af or passive injectors and switches with a CAT5e, CAT6 or CAT7 Ethernet network cable.
Intended for use with Cisco or similar PoE switches - this active PoE solution negotiates with the switch to activate power and provide it to the Pi. It is a compact and cost effective power solution.
This PoE to 5 volt converter allows you to operate the Pi up to 328ft or 100 meters from a power source. The form factor is perfect for a Pi case - especially the CanaKit Premium case. The connector pins are available for GPIO and serial use.
There is room for a large heat sink, and the output power is completely regulated and stable, with much less noise than the Raspberry Pi hat.
Specifications:
Power and data source input: RJ 45 female connector on Pi 3 B+ or Pi 4
Data to powered device: All 4 pairs are active for data at 10/100/1000
Power input Pins 802.3af ( mode A or mode B):1&2 and 3&6 - either polarity; 4&5 + plus, 7&8 - minus
802.3af class:Class 3 - 12.95 watts max
Input Voltage Range: From 44 to 57 volts (Active POE)
Input Current at 48v: 265 ma input delivers 2 amps out
Output Voltage Max load (5v10w) : 5v +- 2% at 2 amps 10 watts
Operating Temperature : 0°C ~ 50°C
Size : 65 x 39 x 11 mm (height from top of Pi pins)
Isolation: Not isolated
Colour: green
Material: plastic
Package Contents:
1 x PoE HAT
1 x radiator
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !"
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
13526. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !
This PoE-Wod device provides an efficient solution for delivering power to a Raspberry Pi 3B+ or 4 over 328ft of network cable.
This device allows power to be carried on 10/100/1000 networks with either 802.3af or passive injectors and switches with a CAT5e, CAT6 or CAT7 Ethernet network cable.
Intended for use with Cisco or similar PoE switches - this active PoE solution negotiates with the switch to activate power and provide it to the Pi. It is a compact and cost effective power solution.
This PoE to 5 volt converter allows you to operate the Pi up to 328ft or 100 meters from a power source. The form factor is perfect for a Pi case - especially the CanaKit Premium case. The connector pins are available for GPIO and serial use.
There is room for a large heat sink, and the output power is completely regulated and stable, with much less noise than the Raspberry Pi hat.
Specifications:
Power and data source input: RJ 45 female connector on Pi 3 B+ or Pi 4
Data to powered device: All 4 pairs are active for data at 10/100/1000
Power input Pins 802.3af ( mode A or mode B):1&2 and 3&6 - either polarity; 4&5 + plus, 7&8 - minus
802.3af class:Class 3 - 12.95 watts max
Input Voltage Range: From 44 to 57 volts (Active POE)
Input Current at 48v: 265 ma input delivers 2 amps out
Output Voltage Max load (5v10w) : 5v +- 2% at 2 amps 10 watts
Operating Temperature : 0°C ~ 50°C
Size : 65 x 39 x 11 mm (height from top of Pi pins)
Isolation: Not isolated
Colour: green
Material: plastic
Package Contents:
1 x PoE HAT
1 x radiator
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !"
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
13526. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !
Specifications
Key Features
- The following is the detailed introduction about our products:
This PoE-Wod device provides an efficient solution for delivering power to a Raspberry Pi 3B+ or 4 over 328ft of network cable. - This device allows power to be carried on 10/100/1000 networks with either 802.3af or passive injectors and switches with a CAT5e, CAT6 or CAT7 Ethernet network cable.
- Intended for use with Cisco or similar PoE switches - this active PoE solution negotiates with the switch to activate power and provide it to the Pi. It is a compact and cost effective power solution.
- This PoE to 5 volt converter allows you to operate the Pi up to 328ft or 100 meters from a power source. The form factor is perfect for a Pi case - especially the CanaKit Premium case. The connector pins are available for GPIO and serial use.
- There is room for a large heat sink, and the output power is completely regulated and stable, with much less noise than the Raspberry Pi hat.
- Specifications:
- Power and data source input: RJ 45 female connector on Pi 3 B+ or Pi 4
- Data to powered device: All 4 pairs are active for data at 10/100/1000
- Power input Pins 802.3af ( mode A or mode B):1&2 and 3&6 - either polarity; 4&5 + plus, 7&8 - minus
- 802.3af class:Class 3 - 12.95 watts max
- Input Voltage Range: From 44 to 57 volts (Active POE)
- Input Current at 48v: 265 ma input delivers 2 amps out
- Output Voltage Max load (5v10w) : 5v +- 2% at 2 amps 10 watts
- Operating Temperature : 0°C ~ 50°C
- Size : 65 x 39 x 11 mm (height from top of Pi pins)
- Isolation: Not isolated
- Colour: green
- Material: plastic
- Package Contents:
- 1 x PoE HAT
- 1 x radiator
- Only the above package content, other products are not included.
- Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !"
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
13526. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !
What’s in the box
1 x PoE HAT
1 x radiator
1 x radiator
Specifications
- SKU: 91954EA2EQ4I7NAFAMZ
- Model: Networking Tools
- Production Country: China
- Size (L x W x H cm): 8x5x4
- Weight (kg): 0.022
- Color: multicolor
- Main Material: plastic
- Warranty Address: None
Verified Customer Feedback
This product has no ratings yet.
915 Generation For Raspberry Pi PoE HAT 5V2A Active Power Over
GH₵ 265.07
GH₵ 498.2747%
Questions about this product?