915 Generation Fosc53B Wireless Wi-Fi 5-Channel USB Oscilloscope Virtual Data Storage Acquisition Recorder Automotive Maintenance Tool

Input capture trigger function
Any channel can be set as a capture trigger source
Can set rising or falling edge capture trigger signal Capture trigger signal level adjustable Data can be saved to the computer automatically transferred to the saved data when the software is started Data can be backed up and later at any time to the data waveform Can display any two channels of differential signal
Lock signal to expand and compress waveforms up to 93 hours

Suitable for monitoring the operation of electrical equipment for a long time and archiving
Suitable for collecting and archiving data such as temperature humidity and light for a long time
Wireless Communication Wi-Fi 24G
Interface type -USB 20
Signal input interface type BNC interface connected with the oscilloscope probe line
Maximum sampling rate 150 kHz
Operating voltage 5 V -USB interface power supply
Consumption current Less than 170 mA
Measurable frequency range 0Hz-----50 kHz
Amplitude adjustment range 10 mV-----1 V
Input impedance 1 Mohm Less than05V 330 05V
Maximum measurement voltage ±8 V ±80 V for probe X10
Amplitude error ±25%
Time domain range 100 uS-----10800 S
Data recording and storage depth 8388608 * 5
Maximum record and save data time 93 hours
Connection
Fosc53B oscilloscope has three connection methods the software can automatically select the connection mode
1 Use USB cable to connect the oscilloscope to the computer When the computer does not have Wi-Fi and cannot connect to this connection mode is adopted This connection requires aUSB driver to be installed on the computer
ColourAs Shown
Materialplastic

Package Contents
1 x Fosc-53B
1 x USB data cable
5 x BNC connector

Only the above package content other products are not included
Note Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm