This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
GH₵ 56.21
GH₵ 105.6647%
In stock
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 13.45 to Tema
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 13.45
Ready for pickup between 14 June & 19 June when you order within next 4hrs 51mins
Door Delivery
Delivery Fees GH₵ 25.35
Ready for delivery between 14 June & 19 June when you order within next 4hrs 51mins
Return Policy
Free return within 15 days for all eligible items.Details
Warranty
None
Seller Information
Glittering
66%Seller Score
18 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Excellent
Customer Rating: Excellent
Product details
The function of the tool setting instrument The measurement and compensation of the tool value in directions can effectively eliminate the error and inefficiency caused by tool setting. No matter what kind of cutting tool is used for workpiece contour turning or milling, all tool tip points or tool axis lines involved in cutting must be adjusted or compensated so that they are accurately located at the same theoretical or axis of the workpiece coordinate system on-line
How to use:
1. clip is fixed on the cutter
2. port has been connected to the control board (A5 interface on the 3018pro control board)
3.Place (plastic + aluminum plate) under the tool material: plastic
Color as shown
GRBL Z-probe Router Tool Setting Automatic Tool Setter. Thickness: 1.6mm (±0.03mm)
Tool Setting Function It can accurately locate the working surface, and is most suitable for PCB engraving.
Easy to Use You can refer to video to understand how to use it correctly.
Probe change the Probe in Grbl to: G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10
What does G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10 mean:
G91: Use relative coordinate mode
G21: Use mm unit
G38.2: Tool setting instruction
Z-30: The Z axis moves 30mm in the negative direction, if it touches the tool setter, it will stop and set this as the origin
F100: the speed of the Z-axis when it is running
;: , instruction
G92: Coordinate , because the tool setter has a thickness, in order to remove the thickness of the tool setter, you need to set the Z1.6: Z-axis 1.6, 1.6 is the thickness of the tool setter, which is subject to the actual measured thickness of the tool setter
;: , instruction
G0: fast moving
Z5: The Z axis moves to the position of coordinate 5, which is convenient for taking out the tool setter
F10: Z-axis upward movement speed Package Contents:
1 x Z-Axis Router Touch Plate set Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
How to use:
1. clip is fixed on the cutter
2. port has been connected to the control board (A5 interface on the 3018pro control board)
3.Place (plastic + aluminum plate) under the tool material: plastic
Color as shown
GRBL Z-probe Router Tool Setting Automatic Tool Setter. Thickness: 1.6mm (±0.03mm)
Tool Setting Function It can accurately locate the working surface, and is most suitable for PCB engraving.
Easy to Use You can refer to video to understand how to use it correctly.
Probe change the Probe in Grbl to: G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10
What does G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10 mean:
G91: Use relative coordinate mode
G21: Use mm unit
G38.2: Tool setting instruction
Z-30: The Z axis moves 30mm in the negative direction, if it touches the tool setter, it will stop and set this as the origin
F100: the speed of the Z-axis when it is running
;: , instruction
G92: Coordinate , because the tool setter has a thickness, in order to remove the thickness of the tool setter, you need to set the Z1.6: Z-axis 1.6, 1.6 is the thickness of the tool setter, which is subject to the actual measured thickness of the tool setter
;: , instruction
G0: fast moving
Z5: The Z axis moves to the position of coordinate 5, which is convenient for taking out the tool setter
F10: Z-axis upward movement speed Package Contents:
1 x Z-Axis Router Touch Plate set Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
- Durable and good quality
- Z-Axis Router Touch Plate
- Grbl Z-prode
- cutting tool setting block
- Setting Probe Milling Tool
- Tool
- The details are as described above
What’s in the box
2 x Fog Lamp(Left+Right)
Specifications
- SKU: 91954TG2GLUWFNAFAMZ
- Model: Engraving Machine part
- Production Country: China
- Size (L x W x H cm): 10x6x1
- Weight (kg): 0.0155
- Color: multicolor
- Main Material: plastic
- Warranty Address: None
Verified Customer Feedback
This product has no ratings yet.
915 Generation Grbl Z-Axis Router Touch Plate Tool
GH₵ 56.21
GH₵ 105.6647%
Questions about this product?