915 Generation GY-BME280-5V Temperature and Humidity Sensor Atmospheric

Detailed Information About The Product:

BME280 is a breakout board equipped with for Sensortec ME280 temperature, humidity and pressure sensors.
The board has an optional I2C address jumper (welded link GS2), I2C pull-up resistor, 7-pin 2.54mm and two 3.5mm mounting holes.
Single board default settings; single power rail Vdd equal Vdd_IO (welding link GS1), pull-up resistance (R2, R3) 10k, protocol selection resistance 0ohm (R1), two power supply pins Vdd and decoupling capacitors on Vdd_IO 0.1 uF.
If you connect the board to two power rails VDD_IO 1.8V and VDD 3.3V, be sure to remove the power rail jumper GS1!

Package 2.5 mm x 2.5 mm x 0.93 mm Metal cover LGA
Digital interface I2C (up to 3.4 MHz) and SPI (3-wire and 4-wire, up to 10 MHz)
Power supply voltage VDD Main power supply voltage range: 1.71 V to 3.6 V
VDDIO interface voltage range: 1.2 V to 3.6 V
Current consumption 1.8 uA @ 1 Hz Humidity and temperature
2.8 uA @ 1 Hz pressure and temperature
3.6 uA @ 1 Hz humidity, pressure and temperature
0.1 uA sleep mode
Operating range: -40℃ to +85℃, 0 to 100% rel. Humidity, 300 to 1100 hPa- Humidity sensor and pressure sensor can be enabled/disabled independently
colour: as shown
Material: ABS

Package Contents:
1 set x GY-BME280-5V Atmospheric pressure sensor module

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !