915 Generation LED Motion Sensor Light Strip Stair 32 Channel Dimming Light Indoor Motion Night Light 12V24V Flexible LED Strip

2 Press and hold the key for 5-6 seconds to enter the step setting mode Long press the switch once to set the first step stairs Short press the switch a second time to set the second step stairs Short press the third time to set the third step stairs and so on
3 After the operation is completed press and hold again for 5-6 seconds to automatically save the corresponding settings

Product name 32-channel stair sensor
Voltage DC12VDC24V
Power 350w
Channel 32 set to 1-32 step
Sensors 2 Pir Sensor
NOTE
This controller does not have the function of lighting on both sides of the stairs
1-AB sensors need to be installed at the entrance and exit of the stairs and face the human body
2- The product is low voltage 12V-24V need to connect transformer Do not directly connect 220V it will burn the controller
3- The product is not waterproof
Important note The positive and negative terminals of the power supply input of the controller cannot be reversed the red wire V is connected to the positive electrode of the switching power supply and the blue or black wire V- is connected to the negative electrode of the switching power supply
24V cool white light belt 1 x 5m 24V cool white light strip
cable multicolor color don't accept the specified color
ColourWhite
Materialplastic
Sizeabout 185 x 78mm

Package Contents
1 x Controller
2 x Induction head

Only the above package content other products are not included
Note Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm