915 Generation Titanium Alloy Throat 3D Printer Nozzle for CR10/S Upgrade

Detailed Information About The Product:

Recommended slicer setting: retraction speed over 80MM/S
retraction length 2.5-4MM
If you are facing PLA clogging problem,please try the followings:
1. Increase the retraction speed. The speed may have limited in the firmware try to change it. G-command "M203 E200"
2. Increase the extruder acceleration. check your firmware settings. G-command "M201 E9000"
3. Reduce the retraction length.it depends on your machine setup.
4. Increase the nozzle temperature by 5-10 degrees.
5. Do not install the 2 screws for support the heatblcok like the stock hotend on the CR-10 printer.
6. Make sure that there is no between the heatsink and the heat breaker.
Colour:Silver
Material:Titanium alloy
Package Contents:
1 * titanium alloy pipe
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !