915 Generation TOOLTOP Touch Thermal Imager Multimeter IR Camera Voltage Ohm On/Off Diode for PCB Electronic Repair Thermal Multimeter ET12S

[ 2-In-1 Function]:Thermal imager + Multimeter 2-In-1 ,with compact and small size, light weight and easy to carry
[Touch screen:] Resistive touch screen operation, with one click function.
[Data transmission & PC software analysis ]:Under USB mode, it is possible to transfer locally saved thermal imaging images and the multimeter mensurement result recording by data chart .And displayed on the computer through PC software.
[Multifunctional]: The multimeter can measure DC voltage, AC voltage, resistance, diode, on/off, capacitance, etc.
[Language]: Both Chinese and English can be set.

[Battery management]: built-in lithium battery (supporting USB charging), with automatic screen turn off and automatic power off functions.
Thermal imager parameters
Sensor: Uncooled focal plane
lmage capture frequency: 20Hz(ET12S)
Thermal imaging pixel: 90*120(ET12S)
FOV:55°(H)*35°(V)
Emissivity: 0.1-0.99 adjustable
Measuring range: -20~ +400℃(ET12S)
Mode:automatic gain
Temperature measurement error:Greater than 0℃:±2℃/±2%; ≤0℃ ±5℃/±5%
Display temperature accuracy:0.1°C/0.1°F
Multimeter parameters
Maximum DC input voltage:1000V
Maximum AC input voltage:750V
Maximum measured resistance:40MΩ
Maximum measuring resistance of capacitance:100uF
Duty cycle measurement range:0.1%-99.9%
Diode measuring range:0V-1.5V
Maximum resistance of on-off detection:30Ω
Counts:
4000counts,Refreshes:6 times per second (ET12S)
Other parameters
Display screen: 2.8 inches 320*480
touch screen: Resistive touch screen
USB interface: TYPE-C
Storage Capacity: 3.5MB
Image Format: BMP
Battery: Built-in Lithium battery
Storage temperature: -20~60℃(-4~140℉)
Working temperature: 0-50℃(32-122℉)
Working humidity: Less than 85%RH(non condensing)
Colour:red
Material:plastic

Package Contents:
1set x Multimeter

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.