915 Generation USB to RS422 RS485 Serial Adapter Converter 5Pin Communicati

Single chip USB to asynchronous serial data interface.Entire USB protocol handled on the chip - No USB- firmware programming required. UART interface support for 7 or 8 data bits,1 or 2 stop bits and odd / even / / space / no parity. Fully assisted hardware or / X-Off software handshaking. Data rates from 300 to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 to 1 Megabaud (RS232). In-built support for event characters and line break condition.
New USB FTDIChip-ID? feature. New configurable CBUS I/O pins. Auto transmit buffer control for RS485 applications. Transmit and receive LED drive signals. New 48MHz, 24MHz,12MHz, and 6MHz clock output signal for driving external MCU or FPGA. receive and transmit buffers for high data throughput. 256 receive buffer and 128 transmit buffer utilising buffer smoothing technology to allow for high data throughput. Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang mode interface with RD# and WR# strobes. New CBUS bit bang mode option. Integrated 1024 bit internal EEPROM for I/O configuration and storing USB , , serial number and product description strings. Device supplied preprogrammed with unique USB serial number. Support for USB suspend / resume. Support for bus powered, powered, and high-power bus powered USB configurations. Integrated 3.3V level converter for USB I/O .
USB to RS422 RS485 Serial Adapter Converter cable. USB to 5Pin terminal block cable.
RS485 RS422 signal output: Data+, Data-, GND, VCC, TXD, RXD When working, with LED light display
/FT232RL Chip with the best compatibility and stability.
Driver Download: https://.ftdichip./Drivers/VCP.htm
Installation Guide: http://.ftdichip./Support/Documents/InstallGuides.htm
Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V .
True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
High I/O pin output drive option.
Integrated USB resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external filter required.
UART signal option.
USB bulk mode.
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI controller compatible.
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
Colour: black
Material: PVC+copper
Size: Cable length is about 1.5 Package Contents:
1 * USB 5 Pin terminal block cable Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.