A-Line Wireless Fingerprint Touch Bluetooth Earphone Headset With Power Display

Technical specification:
*        5.0 + EDR Bluetooth Specification:
*        Noise Reduction: cvc8.0 
*        Transmission Distance: 33ft 
*        Frequency response: 20 - 22 kHz 
*        Capacity: Charging Case 2000mAh / Earbuds 65mAh 
*        Music Time: 120 hours
*        Talk time: 150 hours *        Loading Port: USB 
*        Charging Time: 25 minutes
*        Playback Time: up to 4 hours
*        Standby time: 630 hours


1. Innovative Technology
Built-in powerful Bluetooth 5.0 chip, CVC8.0 noise reduction

2. Touch upgrade Fingerprint touch without pressing
No button control brings uncomfortable pressure to your ears and relieves more pressure on your ears。Answer and hang up
 the call/play pause operation/volume adjustment/up and down song switching/Siri voice wake-up

3. Upgrade the Bluetooth chip, fast connection, stable connection
Bluetooth 5.0, barrier-free connection within 10 meters, smooth music/games/movies/calls without delay, stable and continuous
 connection

4. Siri voice assistant Tap to call
Wake up Siri with one button and have a good chat with your favorite voice assistant. Whether you want Siri to help
 sendmessages, set a timer, or act as your personal DJ, just speak up.

5. Two connection methods can be used at will
Two earphones can be connected to the same mobile phone at the same time, or a single earphone can be connected
 andused, which is equivalent to two independent earphones

6. All Bluetooth can be connected, powerful and compatible
High compatibility, as long as there is Bluetooth, you can connect, support mobile phones, computers, tablets, notebooks, etc.


Q&A Small Theater

Q: One Bluetooth headset does not work
A:1. Check whether the set mono output can be adjusted to dual ear canals. 2. Check if one of the headphones has lost its
 pairing after a dead battery. 3. Check whether the two headsets are connected to two devices. You can turn off the connection
 between the phone and the headset, and delete the Bluetooth headset from the Bluetooth list of the phone. Re-pair the mobile
 phone and the Bluetooth headset and play the audio again

Q: Bluetooth headset cannot be charged normally
A: "1. The Bluetooth headset has been placed for a long time. If it is not used for a long time, the lithium battery inside the
 headset will be in a "sleep" state. The headset will display the charging status as long as the charging time exceeds 20
 minutes.
2. The earphone has not been used for such a long time, and it is not displayed after charging for more than half an hour. Check
 whether the earphone charging data cable plug is damaged, you can try another data cable. Or check if anything is blocking
 the charging point of the headset. If so, please clean it with a toothpick.