Bomge Uhf Wireless Microphone Headband \ Lapel Microphone Du

***** 90 degree rotation receiver interface:The audio interface of the receiver can be rotated 90 degrees, which can be used in various scenarios and is easier to store. In addition, it is equipped with a plastic storage box, which is small and easy to carry, you can put it in your pocket and take it with you
***** Microphone and Rechargeable Receiver:Both the microphone and the earpiece are rechargeable, and can be used as a mobile phone after charging. It does not consume alkaline batteries and is not connected to a power source. It can be carried around without a cushion.
***** Supported devices:Wireless receiver with universal 1/4 plug, can be used with mixers, PA speakers, karaoke machines with 1/4 MIC IN for voice amplification, and phones, laptops, DSLR cameras for recording (with adapter). (Even with the adapter, it is not recommended to use the microphone on the phone).
***** auto connect:The microphone and receiver can be quickly and automatically connected within a distance of 50m, without manual settings, which is very convenient to use.
***** Selectable Frequency - With 16 selectable UHF frequencies, it is less susceptible to interference from electrical appliances and provides stable signal transmission and allows multiple devices to work together without interference.
***** Recommended use:Suitable for home, recording, interviews, outdoor performances, concerts, exhibitions, conferences, assemblies, churches, etc.* Transmitter automatic synchronizationThe device has an automatic sync feature, so it may be difficult to use multiple devices of this model at the same time
.
***** Recommended use:Suitable for home, recording, interviews, outdoor performances, concerts, exhibitions, conferences, assemblies, churches, etc.* Transmitter automatic synchronizationThe device has an automatic sync feature, so it may be difficult to use multiple devices of this model at the same timeMethod of useWith the recelver on, turn on the transmitter to automatically scanthe frequency to the upper frequency point without frequency alignment.2. To change the frequency point,press the set key of the transmitter.Press it to change a frequency point, and the indicator light will flashA total of 16 points are optional, if the frequency point is selected, thefrequency will be automatically scanned, and the indicator light of theupperreceiver will De on.3.For single usethe default is channel B (you can't switch to channelA)4.In case of two transmitters, channelA is red and channel B is blue.When the two transmitters are powered on, press and hold for aboul8 seconds,and the turn channel indicator will flash to enter the conversion state of channelAor BchannelA will turn to channel B orchannel B will turn to channelA5.The receiver only has the on key to automatically align the upper frequency without operation.The upper channelAis brightred andthe upper channel Bis blue6.