Crest Gloss Enamel 5L - PWD Brown

Crest Gloss Enamel is a premium quality interior or exterior enamel for surfaces where a glossy durable finish is required. It is used for application to suitably primed new and old cement plaster walls, fibre-board, ceiling board, gypsum plaster, ceiling boards metal and wood. Ideal for trimming. 

Surface Preparation  Surface must be clean and dry before painting.  Concrete/Cement/Plaster Walls Apply two coats un-thinned.  Wallboards/Ceiling boards No primer required except on bare metal areas (nail heads).  Gypsum Plaster Prime surface with PLASTER PRIMER.  Previously painted surfaces Surfaces must be in sound condition.  
Storage & Packaging  Store away from direct sun, heat and severe cold.  Packaging: 5ℓ 

Specification: 

• Type:  Water-based Acrylic 
•  Color: Brown
•  Spreading rate: 5-9m²/ℓ depending on application.
•  SG at 23°C:  Approx.: 1,45
•   Flash point : Non-flammable 
• Method : Brush or roller 
• Thinning  :Not recommended 
•  Cleaning  : Water
•   Touch Dry:  1 hour
•  Re-coating :Time 4 hours (2 coats required) 

Cautions   

• Do not apply direct to bare metal surfaces. 
• Do not paint during wet or cold (below 10°C) weather. 
• Drying time will be extended during cold or wet weather conditions
• Do not paint on high gloss enamel.