Crest Sheen Coat 5L - Smoke

CREST SHEEN PVA is a good quality Sheen Acrylic PVA. A durable Acrylic PVA with superior hiding power for interior and exterior use. 
Specification:

• Type : Water-based Acrylic
•  Color :  Smoke
• Spreading rate : 5-9m²/ℓ depending on application.
•  Practical spreading rate : The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used. 
• SG at 23ᵒC :  Approx.: 1,45  
• Flash point : Non-flammable 

Surface Preparation  Surface must be clean and dry before painting.  Concrete/Cement/Plaster Wall Apply two coats un-thinned.  Wallboards/Ceiling boards No primer required except on bare metal areas (nail heads).  Gypsum Plaster Prime surface with PLASTER PRIMER.  Previously painted surfaces Surfaces must be in sound condition. 


Application Details 

• Method  Brush or roller
• Thinning : Not recommended 
• Cleaning :  Water 
• Touch Dry :  1 hour 
• Re-coating Time : 4 hours (2 coats required
• 
  

Safety Precautions  

•  Keep out of reach of children.
• Ensure good ventilation during application and drying. 
•  In case of skin contact, wash with soap and water or a recognised skin cleanser.
•  Avoid contact with eyes – In case of contact, rinse eyes immediately with plenty of water and seek medical advice if symptoms persist.