Fast Super Prime 1L

FAST SUPER PRIME is a water-based primer formulated to provide excellent adhesion for subsequent coats of paint when applied to difficult substrates. The low odor, high cover formulation makes FAST SUPER PRIME a hardwearing durable primer that primes a variety of surfaces like ceramic tiles, melamine, glass, PVC gutters and down pipes, wood, anodized aluminum, aged gloss paint, enamel paint and powder-coated metal. NOT RECOMMENDED FOR GALVANIZED IRON. 
Specification

• Type : Water based Polyurethane Acrylic Enamel 
• Appearance : Semi-Gloss 
• Durability :  Excellent 
• Colors : White 
• S G at 230C : Approx. 1,27 
• Recommended : DFT/coat 30 micron per coat at a spread rate of 10m2/ ℓ
•  Flashpoint  : Non-flammable 
• Theoretical : spreading rate 10m2/ ℓ 

Surface Preparation  Ensure that the surface is properly dry and in sound condition,  free from dust, rust, grease, oil, algae, fungus or any loose  particles.  NEW SURFACES  Wooden surfaces (doors, frames, furniture, toys) Sand smooth. Remove all splintered and discoloured wood and apply one coat direct.  Ceramic tiles Ensure surfaces are clean, dry and dust free. Tiles around  kitchen sinks and bath/shower areas must be degreased with  FAST GREASE BUSTER followed by thorough rinsing with  water. All loose grout must also be repaired prior to painting.  NB. Not suitable for floor tiles.  Melamine Dust and degrease. Areas that have developed a sheen due to  repeated handling will have to be sanded. Apply one coat  direct. NB: Only suitable for areas that receive limited wear  and tear e.g. Kitchen, bathroom and bedroom cupboard doors  and frame work.  Glass Clean to remove dust and grease. Apply one coat direct. 
PVC Lightly sand surface to improve adhesion. Clean and degrease.  Rinse thoroughly with water and allow drying. Apply one coat  direct.  Brick and Plaster Remove all dust and loose grit. Ensure surfaces are completely dry. It is recommended that new plaster must be completely dry.  PREVIOUSLY PAINTED SURFACES  Previously painted Enamels, Varnishes and Polyurethane finishes Remove all loose and flaking paint. Sandpaper well with wet-and-dry paper to remove surface gloss. Clean away all contaminants with FAST GREASE BUSTER, rinse thoroughly with clean water, and allow drying. Apply one coat direct.   Safety Precautions 

•   Keep out of reach of children.
•  Ensure good ventilation during application and drying.
•  In case of skin contact, wash with soap and water or a recognised skin cleaner.
•   Avoid contact with eyes – In case of contact, rinse eyes immediately with plenty of water and seek medical advice if symptoms persist.
•  Harmful if swallowed. Do not induce vomiting. Seek medical attention.