1 Pcs 44Key IR Remote Controller for RGB 5050 LED Light Strips & 1 Pcs LED RGB Controller Control IR FB 24 Keys White

1 pcs 44Key IR Remote Controller for RGB 5050 LED Light Strips & 1 pcs LED RGB Controller Control IR FB 24 Keys White
This controller controls the colors for multicolored RGB LED strips.
LED strips must also be driven by a common anode +. All our RGB LED strips have common anode.
with RGB LED Strips are 4 ports, mostly for + acc. Anode / R for red channel / G for green channel, and B for blue channel.
If the full voltage of 12 volts on all channels, then each individual color lights with 100% and you can see white color.
LED Light Strips:
High Quality Standard 44 Key Remote Controller of RGB 5050 LED Light Strips
20 Colors, 5 Light Pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change
6 DIY Keys, you can adjust the R/G/B color freely
Function: Speed and Brightness adjusting; Lock Control
Input Voltage: 12V, Output: three CMOS drain-open output
Easy to connect and operate Control a variety of LED light by adopting an advanced mini control unit with Voltage DA 12V Max.
Connection mode: Common Anode(+)
Output Current: 6A (Max)
Color:20 Colors
8 Light Pattern: Quick / Slow / Auto / Flash / 7 color fade change / 3 color fade change / 7 color jumpy change / 3 color jumpy change
R / G / B increase and decrease control
6 DIY keys
Input Voltage: 12V (Power supply is not included.
You can easily connect to the standard notebook computer power supply)
English manual included
Material: Plastic + metal
RGB Controller:
Infrared remote control with 24 buttons and RGB Controller
DC 12 Volt 3x 2A common anode +
Dimensions: approx . (L x W x H) 62 mm x 35 mm x 23mm
16 solid colors / Dimming / 4 program sequences
perfect for RGB LED strips
Color: White
Material: Plastic


Package Contents:
1 x LED Light Strips
1 x RGB Controller
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.