100 LED Body Sensor Super Bright Waterproof Wall Sconce

Name of product:Solar Interaction wall lamp
Model:100LED
Output:5.5V,1W
Battery capacity:1800/2400mAH
Angle of the sensor:120degrees
Induction distance:3-5meters
Brightness:600LM
Quantlty of LED:100LED

Precautions1.During theflrst use ofthe product, place the product in aplace with sufficient sunlight for charging, the product shouldbe used after being charged for several hours2.When the product will not be used for a long time,pleaseplace the product in a place with sufficient sunlight,too,thecharging time is 1 day.For keeping the function of the battery.you'd better comprehensively charge the product in a place withsufficient sunlight for once a month3. The charging time and charging efficiency of the solar panelmay be affected by the weather and the installation positionConsidering the conversion rate of solar power generation,ifthe product is used with good weather,it will gain highercharging efficiency and effectiveness.4.When there's sunlight and other !ights,and if the power switchis off,the LED lamp will not be lightened in day and night.5.The solarlamp should be installed in the place with sufficientlight to ensure the solar panel will absorb sunlight ofthe solar lamp will be prolongen.6.The angle of the solar lamp and the direction of the light should be adjusted to the best plsition,it is suggested that the bestheight is 2-3m7.During winter or when the sunshine duration is short,it issuggested using the solarlamp under mode 1
Use methodFor charging the built-in battery, please set lamp in the placewith direct sunlightThe strong sunlight can be converted into solar energy in amore effective way.Used in the place where the lightis required, such as path,garage and backyard etc. Within those areas, please place thelight in the place where can be easily illuminated by the sunlight.Used in the place where the light is required.such as path,garage and backyard.etc, Within thoseareas,please place the light in theplace where can beeasily illuminated by the sunllght.Long press for 1s to enter mode 1:Human body induction mode(the lamp will be on when people come,and thelamp will be offafter the people have left for 15s)Pattern 2:Human bodyinteraction+slightlightmode (the lampwill be on when people come,the lamp will be slight after thepeople have left for 15s,and the lamp will be on again whenpeople come)Pattern 3:Slight light mode (the lamp be slight light all the timeno matter ther's any person or not)Notes:lf there's sunlight or other lights on the solar panel,thelamp will not be on even if the ON/OFF switch has been turnedon.During testing,other objective should be used to cover thesolar panel,then the lamp will be on after turning on the ON/OFFswitch.