110V-240V Ceiling PIR Infrared Body Motion Sensor Detector Lamp Light Switch

Specifications
Detection range: 6 metre at 360° scan(Approx)
Time Adjustment: Min 10±3 seconds Max. 7±2 minutes
Detection Circuitry: Passive controlled infra red motion sensor
Power consumption: 110-240 volt, 50Hz, 0.1W(static mode) 0.45W (triggered mode)
Rating: 1200 watt max Incandescent load, 300 watt max fuorescent load.
Supply Connection: The connecting terminals are suitable for up to 1.5mm² cross-section conductors.
Classification: The Sensor is classifed as independent lamp control gear and does not rely on a luminaire enclosure for protection against accidental contact with live parts.

Note: Power factor correction capacitors must be removed from fuorescent and connected at mains input of sensor.

To achieve best result the Security Sensor should be mounted in a ceiling, or under eaves of a building, generally used to control an existing light ftting. The Security Sensor should be mounted 2.2-4metres above the area to be scanned.

To avoid nuisance triggering, the sensor should not be installed near heat sources such as barbecues, air conditioners, other outside lighting, moving cars and fue vents.

Do not install near refective surfaces such as smooth white walls, swimming pools, etc.

The Secutity Sensor scanning specifications(approximately 6 metres at 360°) may vary slightly depending on the mounting height and location.

The detection range of the unit may also alter with temperature change. Before selecting a place to install the Arlec Security Sensor, you should note that movement across the scan area is more effective than movement.



Notice
- Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
- Please allow 1-3CM differs due to manual measurement.
- Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.