110V 250W Engine Heater Oil Pan Sump Tank Heater Protection Engine Reduce Wear

Features:
- Silicone rubber heating plate is mainly composed of nickel-chromium alloy heating wire and silicone rubber high temperature insulation cloth, it is very thin, light weight and profit flexibility
- it has a good waterproof performance, fast heating, temperature uniformity, high thermal efficiency, good toughness, in line with the United States UL94-V0 level of the -resistant standards, easy to use, safe life of up to ten years,
- Silicone rubber heating plate quality is stable, anti-moisture and anti-chemical corrosion, the temperature range from -62 ~ 235 ℃, the maximum load can be 3.1W /
- in the flat and smooth the workpiece can be opened on the direct bonding adhesive (back heat temperature does not exceed 200 ℃)

Specification:
Name :Engine Heater Oil Pan
Model:550982
Material:Silicone Rubber
:Orange
Sizes:9 x 13cm
Voltage:110V 250W
Cable length:About 2 meters
Plug: not with plug
Use: for a variety of car fuel tanks, water tanks, antifreeze, heating and insulation

Practical application
1. Wet, no explosive gas occasions Industrial piping, tank barrels, towers, tank heating, mixing heat and insulation, can be used when the direct winding in the heated parts of the surface.
2. such as , tube heater, health care body sculpting clothing, body sculpting slimming belt compensation heat, widely used in massage cushions and so on.
3. Radar anti-ice and snow, fiber , , photography, and laminates, household appliances, switchgear anti-condensation, presses and packaging .
4. Outdoor communication to provide thermal environment, outdoor insulation antifreeze, chemical heating, pipeline antifreeze, outdoor backup insulation and industries.
5. Frozen protection and air conditioning compressors, motors, submersible pumps and , auxiliary heating.
6. Computer auxiliaries such as laser printers. 7. Plastic film vulcanization.
Note：
1. The use of such electric devices must be noted that the continuous use of the operating temperature should be less than 240 ℃, instant no more than 300 ℃.
2. Silicone heating device can work with the state, that is, with the auxiliary plate to close to the heated surface. Thermal conductivity is good, in the work area temperature does not exceed 240 ℃, the current density of up to 3W / ㎡.
3. Adhesive installation conditions, allowing the operating temperature is less than 150 ℃.
4. If the air dry conditions, subject to temperature constraints, the density should be less than 1 W / ㎡; non-continuous conditions, density up to 1.4 W / ㎡.
5. Working voltage selection to high - high voltage, low - low voltage principle.












a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a