This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
125KMH 85mm Speedometer Gauge Pulse Speedometer 200KMH Odometer Pulse Signal with Indication Light for Diesel Gasoline 12V24V
In stock
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Door Delivery
Return Policy
Free return within 15 days for all eligible items.Details
Seller Information
JiYuLin18888
98%Seller Score
Be the first to follow
Seller Performance
Quality Score: Excellent
Product details
85mm Analog Pulse Speedometer,Pulse Signal
Application: Motorcycle/Marine Boats/Truck/Bus/Electric-Vehicle/Three Wheeler,etc.
Feature:
Electronic Speedometer (stepper motor)
Speed Ratio (impule/km) Adjustable
OverSpeed Buzzer Alarm (Value Adjustable)
Indication Light (Left, Right and High Beam)
Hall Effect Speed Sensor Support
Installation Diameter: 85mm
Speed Range: 0~125KM/H or 0~200KM/H
Mileage range: 0-99999.9KM
Reverse polarity protection and anti-fogging performance
Working Voltage:12V/24V
Working temperatures: - 40 to 85°C
IP67 Waterprof
Connection:
1.GND
2.ING (12/24V)
3. Speed Pulse Signal
4.Voltage Output(8V )
5. Yellow Backlight ( )
6. Left Turn ( )
7.Right Turn ( )
8.High Beam( )
How to set the gauge:
1.Cut an 85mm (3 3/8") hole in the panel (II) allow a clearance of . behind the panel.
2.Remove fastening ring (I), insert gauge from front. Tighten gauge (III) using fastening ring ( I)
3.Connect cables according to the diagram. Choose yellow background light.
Function Select: “PULSE”,“LEARN”,“ODO”,“BUZZ”
Press and hold on the button at the back, then turn on the power supply.
The LCD will show PULSE, LEARN, ODO, BUZZ, etc.
You can select the function to be set after release button.
1.“PULSE” (change speed ratio pulse/km)
After selecting “PULSE”, the LCD will show for example “P 5000” (5000pulse per km) after 3 seconds.
Press the button to change the flashing digit (K Value) in the LCD (from 1000 to 65539)
You can select “PULSE” again to confirm the setting is done.
2.“LEARN”(Learn and record the speed ratio of sensor/engine)
If you do NOT know the speed ratio of sensor/engine, then you can use “LEARN” mode to confirm
the speed ratio.
Firstly connecting the Speed Sensor with our Speedometer, then Enter “LEARN” MODE:
After selecting “LEARN”, the LCD will show for example “0” (pulse per km) , then drive the vehicle
for 1000m (1km), then LCD will show the correct Speed Ratio
3. “ODO”(total odometer)
After selecting “ODO”, the LCD will show for example “5000” (5000 km) , press the button to change
the flashing digit from 0 to 99999 to set the target odometer value.
4.“BUZZ”(change overspeed buzzer alarm threshold value)
After selecting “BUZZ”, the LCD will show for example “B 80” (buzzer will be on when speed over
80km/h), press the button to change the flashing digit from 10 to 240 to set target overspeed
buzzer alarm threshold value.
(Remarks: No.3 function is not ready in the prototype sent to BESTAS, but will be ready in mass
production.)
Please noted: After setting, you should disconnect both Power and GND, and then reconnect the two cable, then it will save the setting. If you just cut Power , then it’ll not work properly
Package:
1 X gauge( no GPS Antenna)
Specifications
Key Features
- Other Part Number:85mm Gauge
- Placement on Vehicle:front
- Country/Region of Manufacture:China
- Interchange Part Number:Speedometer
- Special Features:no GPS
- Material Type:Plastic
- Item Weight:350g
- Item Height:85mm
- Item Width:85mm
- Item Length:85mm
- Manufacturer Part Number:Odometer
- Brand Name:ZMFJH
- Origin:Mainland China
- OEM NO.:Car Meter
Specifications
- SKU: GE779CA27H4QPNAFAMZ
- Size (L x W x H cm): 60x40x40
- Weight (kg): 1
Verified Customer Feedback
This product has no ratings yet.