12V 120W Portable Digital Tire Inflator 22 Cylinder Digital Display

Specifications:
Voltage: 12V
Current:10A
:120W
.:150PSI
Displacement:27L/Min
Material:ABS plastic
:Black And Gold
Size:185mm*150mm*65mm
Cord Length: 300cm / 9.84 ft
Function:Tire inflation lighting

Instructions:
1.The plug into the car socket,and start the car
2.3 meters long cord can be easily connected to the front and rear tires
3.Screw up the air inflation nozzle on the tyre.
4.R key for unit button,- key to decrease ,+ key to increase,Press any key + - to enter
default mode.
5.Default default value is 30PSI.If you want to set the value if the tire .- key to decrease,+ key to increase.
6.Wait for 3 seconds after settint the default value,exit default mode.Real time of current .
7.Turn on the switch.Up to the preset value,automatic stop inflating.
8. Re inflation,need to switch off the switch,then open again.
9.The vehicle mounted pneumatic pump,continuous working time shall not exceed 8 minutes,the need for indirect rest.

Attention: We suggest the using time should not be over 20 Minutes, if more than 20 Minutes, please turn off the product and cooling to 20 minutes before use again.











a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a