2 Phase 3 wires 110V+110V 100A Din Rail 18mm Tuya WIFI Smart Energy Meter Power Consumption Monitor kWh Meter Wattmeter

Descrtion:

Please noted, this TUYA wifi energy meter will update the Kwh data when disconnect with wifi, other type Metering circuit breaker will not increase the Kwhwhen discounnect with wifi.

Please noted this meter only can e mesaure the Kwh voltage, current and active power, don't have timer and e on/off function.

1. Total active energy kWh measure

2. APP can read kWh , R.M.S current , voltage , active power

3. LCD display, Real-time display of Voltage, Current, Active Power, reactive Power, power factory ,frequence, total Energy kWh

4. Power Supply: 110V+110V+N, Please noted this meter for Brazi, USA. 2 phase 3 wires.

5.MAX Current: 100A Clamp CT

6. Pulse Frequency: 1000imp/kWh

7. 35mm Din Rail install

8. Active energy accurate iscla 1 , IEC62053-21

Push the on last more than 10s , the WIFI led will flash quickly , then use APP to operation

bear 400V /hour not damage

Note:This meter Only supports 2.4G Wirele Network, NOT for 5G

The meter is designed to measure single phase three wire AC active energy and variable parameter like residential, utility and industrial application in South America or North America. It can e read from WIFI communication . It is a long life meter with the advantage of high stability, high over load capability, low power lo and small volume.

Basic Function

LCD display, on for LCD display step by step

Bi-directional total active energy, reverse active energy measure in the total energy

The meter also display real conjunction phase voltage, conjunction phase active power, L1 line current, frequency

history active energy consumption tracking by APP

check the real conjunction phase voltage, conjunction phase active power, L1 line current by APP

Clamp CT connection , easy for installation

Pulse LED indicates working of meter

Energy data can store in memory ch more than 15 years after power off

Active energy will keep in meter memory ch when WIFI connect failed . it will not lose and will upgrade after WIFI connection again

18mm width only 1 pole MCB dimension , 35mm din rail installation

Technical Data

Rate voltage AC

90 ～ 300V(L1-L2)110/220V (L1-N=110V L2-N=110V L1-L2=220V)

Rate Current / Frequency

10(100)A /50Hz or 60Hz ± 10%

Also can special order 100A or bigger clamp CT

WIFI

802.11b/g/n

Connection mode

Indirect type

Accuracy cla

1%

Power consumption