250W 24V-48V Brushless Motor Controller LCD Intelligent Anzeige für Elektro Bike

Specifications
Brushless Motor Controller
Voltage: 24V/36V/48V
Low volts: 19V/29V/40V
:250W
Current:13A
Quiescent Current:22Ma
Angle:120/60
Material: Plastic + LCD + Metal
Controller Size:86x53x30MM

Features
- OVER-HEAT PROTECTION: will turn off when over-heat, and restart if the temperature is normal.
- OVER-LOAD PROTECTION: When overload happens,the motor stall more than 2 seconds, the controller will cut off the current out-put to protect the motor and . - DUAL MODE: If the hall motor sensors are broken, controller will operate to None-Hall mode.
- EABS Function:better brake,extend the riding mileage without damaging the motor.
- LOW-VOLTAGE PROTECTION FUNCTION helps to extend the life.
- BRUSHLESS CONTROLLE: working silently and sensitive.

Self-learning matching steps
- Connect Motor Phase Line and Hall Motor Phase line
- Connect the
- Link Two green learning lines together
- Connect the LCD/Smart Display and turn it to the highest level
THE MOTOR WILL ROTATE AFTER SELF-STUDY.
- If it rotates reversely, disconnect the learning line directly, and then plug it in, it will then rotate forward.
- Keep rotating forward for about 20 seconds, then directly disconnect the learning line.(DO NOT TURN OFF THE SWITCH)
- If it learns successfully which means the learning line will not be needed anymore,you can the motor by plugging in the throttle.

Display
Material: ABS +High Hardness Acrylic
Voltage: 24V/36V/48V
Cord Length:180cm
LCD Display Size:90x53x14MM
Smart Display Size:85x52x33MM

Note
- Keep pressing 3 seconds for turning on/off
- SPCP between Display and Controller, could not match controllers

Notes
- Turn off the before wiring, and connect each wire in the wiring diagram.
- The controller should be installed in a place where is ventilated, waterproof, and shockproof.
- The controller connector should be plugged in, and it is forbidden to the positive and negative terminals of the controller supply.
- LCD/Smart display comes with mount ,suitable for 22mm handlebar.
- Suitable for type electric bicycles

Package Includes
1 x Motor Controller
1 x LCD Display or Smart Display
Similarities differences LCD Display Speed Display Gear Shifting Indication Fault Indication Total Mileage Single Mileage Cruise BrakeIndicator HeadlightDisplay normal Smart Display












a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a