2L Automatic Cat Water Dispenser Little Bee Pet Water Dispenser Water Basin

Operation Guide
1. Take out the host and accessories
2. Before using the filter element, soak it in water for 10 minutes
3. Rinse the water tray, filter element and tray of the water dispenser several times (note that the water pump needs to be cleaned separately), and keep the power supply USB interface dry.
4. Add clean water to the head, which is lower than the highest water level or higher than the lowest water level
5. Install the water pump, filter element parts, drinking tray, and faucet in sequence
6. When the USB power cord is connected to the power supply, it can be automatically turned on.
7. *Due to the difference between the shooting effect and the monitor effect, there may be a slight color difference


Precautions
*It is recommended to clean the drinking fountain at least once a week and change the drinking water
*It is recommended to replace the filter element once a month or so
*It is recommended to clean the filter in the pump at least once a week
*During cleaning, remove floating hair and impurities
*When the running sound increases, pay attention to adding water and check the cleaning water pump in time.