30A Solar Charge Controller Home

Features:

• About 30A the Sollar Charger Controller - Fully 4-stage PWM charge management;Dual mosfet Revers e current protection ,low heat production.

• Multifunctional - Build-in industrial micro controller ,One-key setting,digital display,auto memory function.Multiple Protection Functions: sollar controller has short-circuit protection, open-circuit .

• SYSTEM CONNECTION FRAME: Connect the battery to the charge regulator - plus and minus.it will show：if it detects12V battery； if it detects 24V battery.Connect the photovoltaic module to the regulator - plus and minus.Connect the consumer to the charge regulator - plus and minus.

• Battery Type - The regulator is only suitable for lead acid batteries: OPEN,AGM, GE L,it is not suited for nickel metal hydride, lithium ions or other batteries.

• Wide Applications - LCD display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration,Easy to set up and operate. Widely used in home, industrial, commercial etc.

Specification:
This controller can only be used on lead-acid batteries, LED display PWM battery charging 
All necessary protections equipped
Adjustable controlling parameter of the system
Battery Voltage : 12V / 24V
Charge Current : 10A,20A,30A
Discharge Current : 10A,20A,30A
Working Temperature : -35℃ to +60℃
Application : Home, Industrial,
Commercial
Self consume : ≤10mA
Float Charge : 13V
Discharge stop :10.7V
Discharge reconnect :12.6V
Size : 133 x 70 x 32mm/ 5.23x 2.75x 1.25''
12V battery can only access 18V-20V sollar panels
24V battery can only access 36-40V sollar panels
30A （12V/360W（MAX） 24V/720W（MAX） ）
Read the manual carefully before use and then connect the controller!

Warning: The controller and battery pack should be installed away from high temperature and humidity environment, and away from flammabl e and explosive materials.
Please put the controller in a ventilated place during use. Do not cover the controller or install it on the car.
1. Q: Does this controller support lithium batteries?
A: Currently only supports lead-acid batteries (including openings, seals, ge ls and other batteries) Lithium battery is not supported (please do not connect the lithium battery as there is a risk of explosion).
2. Q: My sollar panel is 36V200W, can I charge 12V battery?
Answer: Charge 12V battery, the working voltage of sollar panel is between 17-23V, charge 24V battery, The working voltage of the sollar panel is between 36-46V. Please confirm the power and work of the sollar panel The voltage can be used within this range, if it is too large, it will damage the controller.
Install and Operate: The charge controller should connect the battery first, then the sollar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Revers e current protection, low heat production. 

Packing List:

1X 30A Sollar Charge Contorller

1X English User Manual