36G Ultralight Inner 700c Road Inner Tire for 18 23 25 28

700C：FV65mm Weight：36g
Suitable tire：700*18/700*23/700*25/700*28/700*30/700*32
406：FV45mm 36g
Suitable tire：20*0.9/20*1.0/ 20*1.125/20*1.25/20*1.35/20*1.5
451：FV45mm 27g
Suitable tire：20*0.9/20*1.0/20*1.125/20*1.25/20*1.35/20*1.5
16/18：FV45mm 19g
Suitable tire：16*1.1/16*1.35/16*1.4/18*1.1/18*1.35
Ultralight inner tubes
Lightweight, small, anti-ageing
Ridenow ultra-lightweight inner tubes Made from thermoplastic polyurethane elastomer (TPU) material 70% less weight than regular butyl rubber inner tubes 50% less space pocket Bright and colourful colours for easy identificationWeight 35gMaterial TPUSize: 700 x 18/32c Recommended range of applicationValve length French 65mm- For rim brake and disc brake wheelsets- For road bike tyres 18-32mm wide- Reduced rolling resistanceNozzle length 65mmCompatible with most Rim height(no removable valve)Thermoplastic polyurethane Elastomeric (TPU) material
Lightweight
Thermoplastic polyurethane elastomer (TPU) technologyThe weight of a normal inner is only one third of that of a normal .This makes it a very cost-effective solution for road riders.
Tough
The new TPU material has excellent puncture resistance.It is made in one piece, with no long seams around the circumference of the inner ,There is only a ring of joints around the valve, reducing the chance of trachoma.
Smaller
Compared to conventional inner tubes, the size is reduced by almost 70%.This makes it much easier to carry around, making it ideal for use as a spare inner .
Installation instructions
The inner is made of TPU and it is strictly forbidden to pull on the inner to test its elasticity!It is forbidden to inflate the inner when it is empty (not mounted outer )!Please follow the installation instructions below! (Mainly the installation direction)
Inner Assembly Steps
1. Starting from the valve part, put the into the tire orderly in one direction as illustrated.2. Then, do it orderly direction as illustrated until the whole fits in.3. Starting from the opposite side of the valve (as illustrated), fit tire orderly in bothdirections simultaneously.4. lf no press and pull to adjust the valve, it may result in deformationor breakage while pumping, due to the valve being jammed inside.（After the tire is fitted, press the valve inward.Next, pull the valve outward, to prevent the valve part from being jammed inside.）5. At 0.5 psi, massage and adjust the to fit into the rim.*lts important to massage the at 0.5 psi.This step will prevent the from not fully expanded.
As tyre working rings are often unpredictable, it is important that the tyre is fully inflated.whether the tyre is fully inflated, whether it has just been ridden on a crummy road, whetherwhether something else has happened or not.Therefore, the inner tubes sold in our shopPlease note that the quality of the inner is intact when you sign for it.Once installed and used on the ground, they are not returnable.Please note thatBy placing an order you are acknowledging this paragraph and agreeing to the shop's warranty on outside tyres.No warranty on mounting to the ground. If you do not agree, please do not place an order.