3M Cable Aquarium Heater Submersible Fish Tank Thermostat 100W 300W

Pro Heat Quartz Aquarium Heater Submersible Fish Tank Thermostat 50 to 500W

Packing:
1 x Aquarium Quartz Heater
1 x UK Adapter
2 x Sucker Holder Clips

Product Features:
3M Cable (200/300/500W)
Automatic thermostat
Precise Reliable temperature control
Fully submersible
Double seal waterproof
Ideal for Freshwater or Saltwater
Easy to set required temperature with temperature scale
High Quality Components
High temperature resistance and wear resistance
All heaters come supplied with 2 x sucker holder clips

Specification:
Automatic thermostat
Temperature control range: 20 ~ 34°
Material: High quanlity quartz glass
Voltage: 220V
Frequency: 50Hz
Wattage: 50W /100W / 200W / 300W / 500W
: Black

50W
Voltage: 220V
Frequency: 50Hz
Recommended Aquarium: up to 50 litres
Heater Length: 230mm
Cable Length: 1.3M

100W
Voltage: 220V
Frequency: 50Hz
Recommended Aquarium: 50 to 100 litres
Heater Length: 270mm
Cable Length: 1.3M


200W
Voltage: 220V
Frequency: 50Hz
Recommended Aquarium: 150-200 litres
Heater Length: 330mm
Cable Length: 3M


300W
Voltage: 220V
Frequency: 50Hz
Recommended Aquarium: 200~300 litres
Heater Length: 390mm
Cable Length: 3M


500W
Voltage: 220V
Frequency: 50Hz
Recommended Aquarium: 300~500L
Heater Length: 470mm
Cable Length: 3M

Using:
1. The heating rod of the fish tank must be completely immersed in water to avoid dry burning.
2.When the supply of the heating rod is pulled out, it needs to continue cooling for more than half an hour before the water surface can be taken out, so as to prevent the waste heat of the rod from producing high temperature and causing serious damage to the heating rod. (don't forget when changing water)
3.If the hand wants to go into water, it must cut off the supply of all in the cylinder (filter, heating rod, aquarium lamp) to ensure safety. Do not use wet hand to plug in the supply.
4 Before using this product, please ensure that the aworking voltage indicated on the product is in accordance with the main voltage. It is recommended that the supply of the product be equipped with a short-circuit leakage protection switch whose rated work current is less than 30 mA.


Note!!
Glass products, do not knock or fall.
The heating rod must be cooled before it can be put in or taken out of the tank.




















a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a