4 in 1 meter Voltage Current Power Energy meter Gauge AC 80-260V 20A Watt Power Meter Free Shping

1. Working voltage: 80 ~ 260VAC

2. Test voltage: 80 ~ 260VAC

2. Rated power: 20A / 4500W 100A/22000W

3. Working Frequency: 45-65Hz

A. Function

1. voltage, current, power, energy

2. overload alarm function (over power alarm threshold, the backlight and power flicker ts).

3. The power alarm threshold preset function (can set up their own power alarm threshold).

4.The power on clear function.

5. Power-down data storage function.

6. Large-screen LCD screen full display function (display voltage, current, active power, power).

7. Backlight.

B. display and key

I. Display Interface

Display voltage, current, power, energy from the large-screen LCD screen simultaneously.

II. Display Format

1. Power: measurement range 0 ~ 4.5kW

1kW display format within 0.0 ~ 999.9W;

From 1kW display format 1000 ~ 4500W.

2. Power: measurement range 0 ~ 9999kWh

10kWh within the display format 0 ~ 9999Wh;

Above 10kWh display format 10 ~ 9999kWh;

3. Voltage: Test Range 80 ~ 260V

Display Format 80 ~ 220V

4. Current: Test Range 0 ~ 20A

Display Format 0.00 to 20.00.

III. on

1. The backlight control

By short pre the on to turn on or off the backlight, the backlight status automatic storage.

2. The power cleared

Step 1: Pre the power on 5 seconds until the digital display window flashes, then release the on;

Step 2: If you pre the on again, the consumption data is cleared and cleared quit flashing;

Step 3: If you pre the on again 5 seconds long until no flashing, the charge data is not cleared and exit cleared.

3. The power to set the alarm value

Step 1: Pre the on, when the LCD screen display "SET CLr" after the release on, set the value into the power status report;

Step 2: Power area displays the current value of the power alarm and the lowest digit starts blinking, then you can pre the on of the digital +1, when there is no key operation more than three seconds, automatically switches by short digital set as above;

Step 3: After setting, pre the on more than five seconds to automatically save and exit, the scope of active power threshold set for the 0.0 ~ 4.5kW.

Notes

1. This module is suitable for indoor, not outdoor

2. applied load can not exceed the rated power.

3. The wiring order can not be wrong.

1 x ac

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.